Bids Are Invited For Electronic Auction For Price Registration For The Acquisition Of Equipment (Hydraulic Pumps, Submerged Pumps, Motor Pumps, Motors, Inverters And Hydraulic Parts) In Order To Meet The Operational Needs Of The Secretariat Of Water And Basic Sanitation (Sasan).

Three-Phase Electric Motor Power: 150 Hp Number Of Poles: 4 A Frequency: 60 Hz Nominal Voltage: 380 (V) Nominal Current: 203 (A) Efficiency Index: Ir3 A Efficiency/Efficiency (100% Load) Minimum: 95.8 A Minimum Degree Of Protection: Ip 55 A Housing Material: Cast Iron Or Higher., Three-Phase Electric Motor Power: 100 Hp Number Of Poles: 4 Frequency: 60 Hz Nominal Voltage: 380 (V) Nominal Current: 142 (A) Efficiency Index: Ir3 A Efficiency/Efficiency (100% Load) At Minimum: 95.4 A Degree Minimum Protection: Ip 55 A Housing Material: Cast Iron Or Higher., Three-Phase Electric Motor Power: 75 Hp Number Of Poles: 4 Frequency: 60 Hz Nominal Voltage: 380 (V) Nominal Current: 104 (A) Efficiency Index: Ir3 A Efficiency/Efficiency (100% Load) No Minimum: 95, Centrifugal Pump For Pumping Drinking Water To Horizontal Suction And Vertical Pressure To Single Stage At Nominal Diameter Of The Discharge Flange: 150 Mm At Nominal Diameter Of The Impeller: 400 Mm At A Minimum Flow Of 500 Mâ³/H With A Gauge Head Of 80 M.C.A In The Direction Of Hourly Rotation A Spiral, Horizontal Body Cast In One Piece, With Its Own Feet And With A Wear Ring On The Suction Side A Single Suction Closed Radial Type Impeller, With A Wear Ring On The Pressure Side A Shaft With A Protective Sleeve In The Sealing Region; Shaft Seal With Gasket In Mechanical Seal In Spiral Body And Rotor Material: A48 And Cl30 In Mechanical Seal In Charcoal / Ceramics In Sae1045 Steel Shaft, Centrifugal Pump For Pumping Drinking Water With Horizontal Suction And Vertical Pressure In Single Stage At Nominal Diameter Of Pressure Flange: 150 Mm At Nominal Diameter Of Suction Flange: 125 Mm At Flange Hole With 08 Holes Note: Horizontal Length (Shaft To Flange) Maximum Of Coupling Equipment: 675 Mm At Minimum Flow Of 31.0 Mâ³/H With Manometer Height Of 75 M.C.A With A Power Of 125.0 Hp At A Frequency Of 60 Hz At A Rotation Speed Of 1750 Rpm At A Rotor Diameter Of 380 Mm On Its Own Feet With A Hole For Fixing To A Base., 03/11/2025 - 14:26:00, Centrifugal Pump For Pumping Potable Water Horizontal Suction And Vertical Repression, Single Stage At Nominal Diameter Of The Discharge Flange: 150 Mm At Nominal Diameter Of The Rotor: 315 Mm At A Minimum Flow Of 450 Mâ³/H With A Gauge Height Of 50 M.C.A In A Clockwise Rotation Direction At A Spiral Body, With Wear Ring On The Side Of Replace The Shaft With A Protective Sleeve In The Seal Region; Shaft Seal With Mechanical Seal Gasket Spiral Body And Rotor Material: A48 And Cl30 Mechanical Seal In Charcoal / Ceramic Sae1045 Steel Shaft, Monoblock Pump Power: 30.0 Hp Motor With: Number Of Poles: 2 Frequency: 60 Hz A Nominal Voltage: 380 (V) Three-Phase Nominal Current: 42. 1 (A) Efficiency Index: Ir3 A Efficiency/Efficiency (100% Load) Minimum: 92. 4 A Minimum Degree Of Protection: Ip 55 A Housing Material: Cast Iron Or Greater Flanged Monoblock According To Ansi B16.1A Snail, Rotor, Pressure Cover, Intermediate And Gg-25 Cast Iron Bearing To Wear Rings And Gg-15 Cast Iron Bearing Cover To Mechanical Seal Made Of Aisi-304 Or Higher Stainless Steel, Buna N, Graphite And Ceramic To Back Pull-Out System For Removing The Pump Assembly From The Snail To The Mechanical Seal Bushing Of Aisi-304 Stainless Steel Or Higher Operating Point: Minimum Flow Of 148.0 Mâ³/H With Manometer Height Of 40 M.C.A At Nozzle Diameter: Reca