Bids Are Invited For Acquisition Of A Road Water Tank With A Capacity Of 8,000 Liters

Water Tank. Road Water Tank, Capacity 8,000 Liters, Cylindrical Shape (Internal Diameter 1600 Mm), According To Dner Standards. Internal Module: Internal Surface With A Thickness Of 3.00 Mm Ff (Cold Thin) 2B Finish, In Aisi 304 Stainless Steel Material. The Internal Covers Are 3.00 Mm Thick In Aisi 304 Stainless Steel Material, With 2 (Two) Compartments. The Sheet Metal Splices Are Carried Out Using A Stainless Steel Tig Welding Process On The Internal Part And A Stainless Steel Mig Welding Process On The External Part. These Welds Are Well Rounded On The Internal Part For Perfect Pickling And Polishing For Perfect Hygiene In Accordance With Ministry Of Agriculture Standards. Manholes: 450 Mm Diameter, Made Of 5.00 Mm Thick Aisi 304 Stainless Steel Material, Located On The Ceiling Of The Compartment. With Non-Toxic Rubber Seal. Manhole Covers: Made Of 3-Inch Aisi 304 Stainless Steel Material, With 3-Inch Relief/Vacuum Valve Made Of 3-Inch Aisi 304 Stainless Steel Material. Loading And Unloading System: Without Inlet Pipe. The Liquid Outlet In The Lower Part Of The Tank With Piping Made Of Aisi 304 Pi/Pe Stainless Steel Material, 3 In Diameter And 1.50 Mm In Wall Thickness. Valves In Aisi 304 Stainless Steel Material, 3 Manuals For Opening And Closing The Compartments. Self-Priming Pump Mechanical Drive System: # Self-Priming Sanitary Pump In Aisi 304 Stainless Steel Liquid Ring Mod 30 # Bearing With 25 Mm Shaft Output For Gear Coupling # Flow 30,000 L/H # Inlet And Outlet In Aisi 304 Stainless Steel With 900 Curves And 2.1/2 Sms Male # Shaft Seal With 1.3/8 Viton Mechanical Seal. # Aisi 304 Stainless Steel Filter Inside The Inlet Thread. Mechanical Drive 01 Transmission Box Al 60 1:1, 5 Helical (Multiplier) 01 Aco