Bids Are Invited For Hiring Of Specialized Companies For The Supply Of Equipment And Permanent Materials Remaining (Failed Items) From The Bidding Process Carried Out In 2024, Intended For The Acquisition Of Permanent Equipment And Materials For The Orthopedic Workshop – Proposal No. 17298.800000/1220-01 – Ms.
Bids Are Invited For Hiring Of Specialized Companies For The Supply Of Equipment And Permanent Materials Remaining (Failed Items) From The Bidding Process Carried Out In 2024, Intended For The Acquisition Of Permanent Equipment And Materials For The Orthopedic Workshop – Proposal No. 17298.800000/1220-01 – Ms.
Pedal Bucket: Steel; Capacity 30L Up To 49L., Bucket/Trash Bin: Capacity From 11 Up To 20L; Made Of Steel Or Painted Iron., Bench For Orthopedic Workshop: Workbench With Structure In Steel Profile With Epoxy Painting. Top Measuring At Least 2000 X 600 X 850 Mm Made Of Wood With A Minimum Thickness Of 30 Mm And Drawers. No Arms; No Height Adjustment; Without Rodizio; Upholstered Seat And Back., Tube Bender: Hydraulic Bender / Bender For Tubes Of At Least 3/8 Inches With Walls Up To 4.5 Mm Thick., 10/31/2025 - 20:53:25, Tracer Clamp: Tracer Clamp With Height Adjustment Capacity From 0 To 30 Cm Or Greater, Stable Cast Iron Base With Stainless Rods., Mig Mag Welding Machine: Mig Welding Machine For Wires With Gas Or Without Gas. Steel Wire Diameter: 0.8 - 1 Mm. Current Regulation From 30 To 185 A. Protection Fuse. Nominal Voltage: 220V/ Single-Phase, Frequency: 60 Hz. Power Stages: 4. Protection Class: Ip21, Degree Of Protection: H., Bench Vise: Bench Vise Nº 3 To 5, Tool In Nodular Or Cast Iron And Forged Steel, Jaws With Common Or Rectified Jaws, Driven Through A Crank Approaching Or Distance The Same, Pelvic Level (Pelvimeter): Pelvic Level In Anatomically Arched Aluminum To Measure Leveling At The Level Of The Pelvis., Electric Cooker For Making Ortheses: Electric Cooker For Making Ortheses In Low Temperature Thermoplastic, Built In Reinforced Aluminum For Uniform Heat Distribution, Non-Stick Surface, Power Minimum 1,200 W Or Higher, With Minimum Measurements Of 40 Cm It Has Numbers On The Top And Letters On The Side. Minimum Dimensions (Open): 2 X 1 M. Minimum Dimensions (Closed): 1 X 1 M., Telephone: Corded; Caller Id; No Answering Machine.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
