Tenders Are Invited For Purchase Of A Tractor With A Flail Mower

The Subject Of The Order Is: Delivery Of A Brand New Tractor With A Flail Mower. Technical Specifications Of The Tractor: 1) Year Of Production: 20252) Engine/Drive) Minimum 4-Cylinder Diesel Engine Meeting The Stage V Standard B) Displacement: Min 1400 Cm3, Max 1600 Cm3 C) Engine Power Min 38 Hp, Max 45 Hpd) It Is Required That The Tractor And Engine Are From The Same Manufacturer3) Transmission/Drive) Type: Hydrostatic (Hst)B) Automatic Engine Speed Control Via The Hst Driving Pedalc) Minimum Of 3 Hst Rangesd) All-Wheel Drive With Differential Lock On The Rear Axle) Power Steeringf) Front Axle With Angle Gearg) Disc Brakes, Wet4) Hydraulic Performance And Linkage) Rear Linkage Capacity (At Lifting Points): Min. 1,000 Kgb) Positional Adjustment Of The Rear Linkagec) Linkage Cat. 1D) Minimum Two Double-Sided Valves At The Front And Two At The Reare) Capacity Of Hydraulic Pumps In Total Minimum 35L/Min5) Requirements/Weight/Dimensionsa) Weight Minimum 1100 Kgb) Weight Maximum 1250 Kgc) Maximum Dimensions: Length Without Front Linkage Maximum 3000 Mm Maximum Height 2250 Mm Maximum Width 1420 Mm6) Pto/Speeds/Performance) Rear Pto Min: 540/540E Rpmb) Interaxial Shaftc) Independent Electro-Hydraulically Controlled Ptod) Maximum Transport Speed: 30 Km/H (+/- 10%)7) Additional Equipmenta) Four-Post Cabin With Approvalb) Heater) Air Conditioningd) Sun Visor In The Cabine) Front And Rear Work Lamps Min. 2 Pieces Eachf) Air-Suspended Seat With Headrestg) Multifunction Control: One Lever Can Operate The Front And Rear Hydraulic Valvesh) External Pto Control On The Fenderi) Engine Speed Memory For At Least Two Speeds) Grass Tires (Wide Profile Tires, Intended For Work On Lawns And Green Areas. These Tires Must Be Of The Grass Type Or Equivalent, Do Not Damage The Turf Or Create Ruts, Have Tread With A Gentle Pattern And A Large Contact Surface With The Ground)K) Front Linkagel) Front Ptom) Tractor Turning Radius Up To 2.4 M Technical Specifications Of The Flail Mower: 1) Dedicated And Compatible With The Tractor Offered By The Contractor (Same Manufacturer) 2) Weight Min. 380 Kg (The Mower Must Have An Unladen Mass Of 380 Kg, Specified By The Manufacturer In The Technical Documentation, And This Mass Cannot Include Additional Weights Or Weighting Elements Installed To Meet This Requirement)3) Total Width: From 1600 To 1900 Mm4) Working Width: From 1500 To 1700 Mm5) High Discharge Cassette: Min. 1700 Mm6) Discharge Hydraulic7) Grass Collector Capacity: Min. 800 Liters8) Number Of Hammers: Min. 45The Terms Of Delivery, Service, Guarantee And Warranty Are Specified In The Draft Provisions Of The Contract. The Offered Subject Of The Order Should Have All Approvals, Certificates, Testimonials Or Technical Approvals Required By Applicable Law And Be Approved For Traffic In The Territory Of The Republic Of Poland. The Contractor Will Provide Service And The Availability Of Spare And Consumable Parts Required In The Removal Of Failures Of The Subject Of The Order

Refer document

FileName	File Description
Global Tender Document	84639d32-1481-4ef2-a62a-5454a820ecf8.html