Bids Are Invited For Acquisition Of Hydraulic Materials For Maintenance And Optimization Of Several Reservoirs In This Municipality, According To The Specifications Of The Notice And Its Annexes.

Gate Valve Dn 150Mm Body Wcb Rising Stem Flange End 150Lbs Cast Carbon Steel Wcb, Seat Ring And Carbon Wedge, Manual Handwheel Drive, Flange Pn-10, Drilling Pn-10, Disassembly Joint Dn150, Body Against Flange And Piston In Welded Carbon Steel Pn-10, Ring Rubber Seal Tie Rod And Nut In Galvanized Carbon Steel Pressure 2.5Mpa, Coated With Polyamide Epoxy Paint., 90° Bends In Cast Iron Dn150mm, With Flanges Pn-10, With Flanges And With Foot Pn-10, Valve Va-611 With V-Port Disc. Dn -150Mm, Automatic Hydraulically Operated Self-Mounting Pressure Sustainer Through Double Camera And Diaphragm Type Actuator, Idrodynamic Body “Y” Version Flanged End With Drilling Template According To Abnt Nbr 7673 Pn-10 To Operate With A Maximum Working Pressure And Tests Of Up To 160 M.C.A (16Kgf/Cm²) Body And Cover With Modular Cast Iron, Stainless Steel Rod, Diaphragm With Epdm, Epd Seal. Bronze Sealing Seat, Shutter Disc With V.Port Device, Aisi 302 Stainless Steel Spring, Copper Interconnection Tubing With Y Filter To Protect The Hydraulic Circuit, Pressure Sustaining Control Pilot With Metallic Body And Cap, Needle Registration, Blocking Valve And Control Pressure Gauge Built With A Stainless Steel Case Filled With Glycetin. Internal And External Epoxy Powder Coating, Electrostatically Deposited With A Minimum Thickness Of 150 Microns., 10/31/2025 - 15:00:56, Cast Carbon Steel Gate Valve Dn200mm, With Flanges Pn-10 Internal Stainless Steel Components, External Rising Stem, With Thread Trapezoidal, Specifications Abnt- Nbr 12558 Class 150., Joint Dn200mm, Disassembly In Ductile Cast Iron Coated With Epoxy Flange Pn-10., Washers Di 205Mm De= 263Mm E=1.5Mm, Asbestos For Flanges, Washers Di 305Mm De= 366Mm E=1, Screws D= 20Mm L=90Mm, For Full Thread Flange Joints, Butterfly Valve Dn300mm, In Ductile Cast Iron Pn-10, Class 150B Nbr 6916, Bi Eccentric Standard Abnt Nbr 7675, Construction According To Awwa C504 Standard, Internal And External Pressure Can Epoxy Coated Thickness, Manufacturers Mark, Driven By Reduction Mechanism., Dn150mm Valve, Level Controller Hydraulically Operated Through Solenoid And Electric Float With Double Camera And Diaphragm Type Actuator, Hydrodynamic Body Y Version, Flanged Ends With Drilling Template. According To Abnt Nbr 7675 Standard – Pn-=10 To Operate With Maximum Test Working Pressure Of Up To 160 M.C.A. (16 Kgf/Cm2). Lid Body In Modular Cast Iron Astma -536, Diaphragm In Epdm, Seal In Epdm, Sealing Seat In Bronze, Spring With Stainless Steel Aisi 304, Interconnection Tubing With Copper With Y Filter For Hydraulic Circuit Protection, 3-Way Industrial Solenoid Blocking Valve, Internal And External Epoxy Coating Electrostatically Deposited Powder With A Minimum Thickness Of 150 Microns. Valve Dimension: 100M Reservoir Bottom Dimension: 101.00M Maximum Reservoir Level Dimension 104M., High Reservoir Level Control Valve Dn 50 Mm (2), Hydrodynamic Body “Y” Version, Flanged Ends With Drilling Template According To Abnt Nbr 7675 Standard, Pn-10 To Operate With One Pressure Maximum Static On Site: 50 M.C.A., Modular Cast Iron Body And Cover, Epdm Diaphragm And Seal, Stainless Steel Spring, Copper Interconnection Tubing With “Y” Filter For Hydraulic Circuit Protection, Internal And External Coating