Bids Are Invited For Price Registration For The Possible Acquisition Of Luminaires With Led Technology For Maintenance Of The Municipality’S Public Lighting

Led Public Luminaire With Maximum Power 75W Using Led Technology (Light Emitting Diode), Made Of Aluminum Body. Must Meet The Following Characteristics: Single Body Made Of Aluminum Alloy, Injected At High Pressure And Or Extruded Aluminum, Having Self-Cleaning Heat Dissipation Fins; It Must Have An Internal Pressure Relief Valve; Finish Painted By Electrostatic Process In Powdered Polyester Resin; Product Identification Made Through Laser Engraving Directly On The Body Of The Luminaire; As Described In The Generic Standards Below; Minimum Degree Of Protection Ip 66 Total For Optimal Assembly And Driver Compartment; Robust Construction Resistant To Severe Vibrations And The Action Of Winds With Speeds Of 150 Km/H, Resistance To Mechanical Impact Ik-09; Fixing For Arm Or Central Support Of 48.5 Mm With Angle Adjustment Of ± 10° Directly On The Luminaire Without The Use Of An Adapter, Screws Made Of Stainless Material, The Housing Block Must Be Separated From The Optical Assembly. Color Rendering Index (Irc = 70);With Color Temperature Of 5000K; Maximum Power Declared On The Certificate Of 75 Watts: Luminous Efficiency Declared On The Certificate Equal To Or Greater Than 160Lm/W; It Must Have A Luminous Flux Declared On The Certificate Of At Least 12,000 Lumens; Transverse Photometric Classification Type Ii Or Iii Longitudinal Short, Medium Or Long; Bivolt Supply Voltage 110V To 240V, Surge Protector Against Voltage Transients With 15Kv Capacity; Power Factor Equal Or Greater Than 0.92; Total Harmonic Distortion (Thd) Less Than Or Equal To 15%; Operation With Full Brightness Immediately After Power Supply Returns; Useful Life Of 102,000 Hours With 70% Maintenance Of Initial Luminous Flux; The Luminaire Will Be Supplied With A Standard Ansi 3, 5 Or 7-Pin Base And Dimmable Driver (0-10V). Minimum 5-Year Warranty. The Luminaires Must Have Active Registration With Inmetro And Present All The Tests Of Ordinance 20 Updated By 62 Inmetro. Color Rendering Index (Irc = 70);With Color Temperature Of 5000K; Maximum Power Declared On The Certificate Of 55 Watts: Luminous Efficiency Declared On The Certificate Equal To Or Greater Than 165Lm/W; Must Have A Useful Luminous Flux Of At Least 9,075 Lumens; Transverse Photometric Classification Type Ii Or Iii Longitudinal, Surge Protector Against Voltage Transients With 10Kv Capacity; Power Factor Equal Or Greater To 0, 5 Or 7 Pins And Dimmable Driver (0-10V). Minimum 5-Year Warranty. The Luminaires Must Have Active Registration With Inmetro And Present All The Tests Of Ordinance 20 Updated By 62 Inmetro, The Luminaire Must Have An R Fixing Support, A 135W Led Lamp For The End Of The Arm. Luminaires Must Be Manufactured From Injected Or Extruded Aluminum. They Must Have Couplings And Connections For A Ø 53Mm Arm; It Is Mandatory To Have An Articulated Arm Hitch That Allows Angle Adjustment Of At Least 10° Degrees Downwards And 10° Degrees Upwards (Angle Adjustments Made Only By Screws On Fixed Couplings Are Not Accepted). The Luminaire Must Have A Heat Dissipation System Using Fins Exposed To The Weather For Proper Thermal Exchange. These Fins Must Form A Single Piece With The Surface That Will Be Installed.