Bids Are Invited For Hiring Company For Construction Of Industrial Shack - Standard Project - Espaço Paraná Industrial - Type 1. Sam 48 Priority 47 - Agreement 908/2025.

Construction Plate 4 Af_01/2024, Mechanical Soil Compaction For Execution Of Radier, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021, Small Grease Trap (Capacity: 19 L), Circular, In Pvc, Internal Diameter= 0.3 M. Af_12/2020, 10/30/2025 - 13:56:25, Rectangular Hydraulic Buried Box In Masonry With Solid Ceramic Bricks, Internal Dimensions: 0, 6X0, 6 M For Drainage Network. Af_12/2020, Concrete Drill Stake, 25Cm Diameter, Manual Excavation With Shell Auger, With Starter Reinforcement. Af_05/2020, Manufacture, Assembly And Disassembly Of Radie Formwork, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, Simple Straight Leg, Made Of Resinated Wood Sheet, 4 Uses. Af_09/2020, Block Frame Using 5 Mm Ca-60 Steel - Assembly.Af_01/2024, Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, In Resin Plywood Sheet, Assembly And Disassembly Of Formwork For Crowning Block, In Sawn Wood, E=25 Mm, 2 Use.Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beam, 4 Uses. Af_01/2024, In Resin Plywood Sheet, E=17 Mm, Block Frame, Baldrame Beam Or Shoe Using 8 Mm Ca50 Steel - Assembly., Baldrame Beam Or Shoe Using 10Mm Ca-50 Steel - Assembly., Baldrame Beam Or Shoe Using 12.5 Mm Ca-50 Steel - Assembly., Baldrame Beam Or Footing Using 16 Mm Ca-50 Steel - Assembly., Pillar Or Beam Frame Of Conventional Structure Reinforced Concrete Using 5.0 Mm Ca-60 Steel - Assembly.Af_06/2022, Pillar Or Beam Frame Of Conventional Structure Reinforced Concrete Using 8 Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Mm Ca-50 Steel, Pillar Or Beam Frame Of A Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly.Af_06/2022, Pillar Or Beam Frame Of A Conventional Reinforced Concrete Structure Using 16.0 Mm Ca-50 Steel - Assembly, Cutting And Bending Ca-60 Steel, 5.0 Mm Diameter, Cutting And Bending Ca-50 Steel, 6.3 Mm Diameter, 8 Diameter, Pile Reinforcement Assembly, Diameter = 8.0 Mm. Af_09/2021_Ps, Diameter = 10, 0 Mm., Assembly Of Transverse Reinforcement Of Rectangular Section Piles, Diameter = 5, Concrete Fck = 20Mpa, Ratio 1:2, 7:3 (In Dry Mass Of Cement/Medium Sand/Gravel 1) -Mechanical Preparation With 400 L Concrete Mixer. Af_05/2021, Concrete Fck = 25Mpa, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 400 L Concrete Mixer. Af_05/2021, Concrete Fck = 30Mpa, 1:2, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With A 400 L Concrete Mixer, Launching Using Buckets, Thickening And Finishing Concrete In Structures. Af_02/2022, Ballast With Granular Material, Applied On Floors Or Slabs On Ground, Thickness Of *5 Cm*. Af_01/2024, In-Place Molded Lintel In Concrete For Doors With Up To 1.5M Span., In-Place Molded Concrete Lintel, Molded In-Place Concrete Masonry Lashing Strap, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Surface Waterproofing With Asphalt Blanket, One Layer, Including Application Of Asphalt Primer, E=4Mm And E=4Mm., Main Structure In Precast Concrete - As Per Standard Project, Expansion Joint With Is