Pressure Hose For Motor Pump Dn 100 Mm, Length - 50 M, Capable Of Withstanding Pressure Up To 8 Atmospheres, Is Reliable Equipment For Your Pumping System. With High Quality Materials And Durable Construction, It Provides Efficient And Safe Operation In A Variety Of Environments. Product Material - Polyester; Polyurethane Foam. With A Rubberized Inner Wall (The Inner Coating Is Made Of High-Quality Polymer Materials That Ensure Durable Operation In Regions With Temperate And Cold Climates). Irrigation Hose / Pressure Fire Hose For Drainage Pump And Motor Pump 76 Mm. Pressure Hoses Are Widely Used In Household Farming, Construction And Industry And Are Designed For Pumping Liquids. Due To Their Resistance To Frost (Down To -40C) They Can Be Used In Winter. Working Pressure - 1 Mpa. Burst Pressure - 2 Mpa., Pressure Hose For Motor Pump Dn 150 Mm, Length - 50 M, Capable Of Withstanding Pressure Up To 8 Atmospheres, Is Reliable Equipment For Your Pumping System. With High Quality Materials And Durable Construction, It Provides Efficient And Safe Operation In A Variety Of Environments. Product Material - Polyester; Polyurethane Foam. With A Rubberized Inner Wall (The Inner Coating Is Made Of High-Quality Polymer Materials That Ensure Durable Operation In Regions With Temperate And Cold Climates). Irrigation Hose / Pressure Fire Hose For Drainage Pump And Motor Pump 76 Mm. Pressure Hoses Are Widely Used In Household Farming, Construction And Industry And Are Designed For Pumping Liquids. Due To Their Resistance To Frost (Down To -40C) They Can Be Used In Winter. Working Pressure - 1 Mpa. Burst Pressure - 2 Mpa., Pressure Hose For Motor Pump Dn 76 Mm, Length - 50 M, Capable Of Withstanding Pressure Up To 8 Atmospheres, Is Reliable Equipment For Your Pumping System. With High Quality Materials And Durable Construction, It Provides Efficient And Safe Operation In A Variety Of Environments. Product Material - Polyester; Polyurethane Foam. With A Rubberized Inner Wall (The Inner Coating Is Made Of High-Quality Polymer Materials That Ensure Durable Operation In Regions With Temperate And Cold Climates). Irrigation Hose / Pressure Fire Hose For Drainage Pump And Motor Pump 76 Mm. Pressure Hoses Are Widely Used In Household Farming, Construction And Industry And Are Designed For Pumping Liquids. Due To Their Resistance To Frost (Down To -40C) They Can Be Used In Winter. Working Pressure - 1 Mpa. Burst Pressure - 2 Mpa., Suction And Pressure Hose Dn Internal - 100/102 Mm, Dn External - 114 Mm. Working Pressure Not Less Than 2.5 Bar. Bending Radius, Not Less Than 280 Mm. Vacuum, Not Less Than 700 Mbar. Reinforced Suction Hose With An Internal Diameter Of 100-102 Mm For A Motor Pump. Area Of Application: Pumping Technical Liquids, Pumping Thick Food Masses. Temperature Range: From -15 °C To +65 °C. Material: Pvc. Construction: Smooth Inner Wall, Galvanized Spiral. Transparent Suction And Pressure Hose Made Of Polyvinyl Chloride. Reinforced With A Metal Spiral Made Of Galvanized Steel, Which Is Resistant To Moisture. The Weight Of The Hose Is From 0.16 To 6.35 Kg/M, It Can Withstand Significant Loads, High Pressure, And Vacuum. This Is An Industrial Hose That Is Characterized By Flexibility., Suction And Pressure Hose Dn Internal - 76 Mm, Dn External - 88 Mm. Working Pressure Not Less Than 2.5 Bar. Bending Radius, Not Less Than 190 Mm. Vacuum, Not Less Than 800 Mbar. Reinforced Suction Hose With An Internal Diameter Of 76 Mm For A Motor Pump. Area Of Application: Pumping Technical Liquids, Pumping Thick Food Masses. Temperature Range: From -15 °C To +65 °C. Material: Pvc. Construction: Smooth Inner Wall, Galvanized Spiral. Transparent Suction And Pressure Hose Made Of Polyvinyl Chloride. Reinforced With A Metal Spiral Made Of Galvanized Steel, Which Is Resistant To Moisture. The Weight Of The Hose Is From 0.16 To 6.35 Kg/M, It Can Withstand Significant Loads, High Pressure, And Vacuum. This Is An Industrial Hose That Is Characterized By Flexibility., Suction And Pressure Hose Dn Internal - 150 Mm, Dn External - 170 Mm. Working Pressure, Not Less Than 8 Atm. Bending Radius, Not Less Than 350 Mm. Vacuum, Not Less Than 700 Mbar. Reinforced Suction Hose With An Internal Diameter Of 150 Mm For A Motor Pump. Area Of Application: Pumping Technical Liquids, Pumping Thick Food Masses. Temperature Range: From -15 °C To +65 °C. Material: Pvc. Construction: Smooth Inner Wall, Galvanized Spiral. Transparent Suction And Pressure Hose Made Of Polyvinyl Chloride. Reinforced With A Metal Spiral Made Of Galvanized Steel, Which Is Resistant To Moisture. The Weight Of The Hose Is From 0.16 To 6.35 Kg/M, It Can Withstand Significant Loads, High Pressure, And Vacuum. This Is An Industrial Hose That Is Characterized By Flexibility., Please Read The Technical Specifications Carefully. Waterproof Bib Overalls Article: 1Kr-01. Characteristics And Description. Type - Wading Overalls. Fabric Type - Pvc. Color - Olive/Black/Camouflage. Season - Demi-Season. Material - Pvc. Boots: Height - At Least 150 Cm. The Overalls With A High Back, Length-Adjustable Straps And A Convenient Internal Pocket Are Made Of Waterproof Pvc Material, Which Is Hermetically Connected To The Boot. Recommended For Use In Public Utilities, River And Marine Industries., Pil Tape (Pvc-L), For Winding Main Gas And Oil Product Pipelines As An Insulating And Protective Coating, To Protect The Outer Surface Of Main Gas And Oil Product Pipelines From Corrosion During Construction, Repair, As Well As For Waterproofing Heat Pipelines. Used For Installation And Repair Of Pipelines. The Tape Does Not Have Holes, Bubbles, Cracks, Gaps In The Adhesive Layer Over Its Entire Area And Tears On The Edges. When Rewinding The Roll, The Adhesive Layer Does Not Peel Off And Does Not Transfer To The Other Side Of The Tape. The Surface Of The Roll Is Smooth. A Tape Made From A Polyvinyl Chloride Composition Is Rolled By Calendering With An Adhesive Layer Applied On One Side. Pil Tape (Pvc-L) Meets Strict Technical Standards And Has The Following Characteristics: Color: Blue, Black. Tensile Strength: No Less Than 80 N/Cm. Elongation At Break: Not Less Than 160%. Stickiness: At Least 25 Seconds. Brittleness Temperature: Not Higher Than -30°C. Electrical Resistance: No Less Than 1×10¹¹ Ohm/Cm. Water Absorption: No More Than 0.5% For 1000 Hours At 20°C. Tape Width: No Less Than 150 Mm, No More Than 450 Mm. Tape Thickness: Not Less Than 0.4 Mm. Length In Reel: Not Less Than 100 ± 0.5 P/M. Year Of Manufacture No Earlier Than 2025., Switching Unit Bc Su Kdm Aire.469535.002. Article: 000014362. Applicability - Maz Ko-829. Weight: Not Less Than 1.2 Kg. Technical Characteristics Of The Kdm Control System: Rated Supply Voltage +24V, Supply Voltage Range From +12V To +35V, Power Consumption In Active Mode - No More Than 10 W, Power Consumption In Off State - No More Than 1.5 W. Operating Temperature Range -40 - +85 °C, Protection Degree Of The Switching Unit Housing - Ip 65. Before Delivery, Agree The Product With The Customer., Suction And Pressure Hose Dn Internal - 50/51 Mm, Dn External - 58/61 Mm. Working Pressure Not Less Than 3 Bar. Bending Radius, Not Less Than 120 Mm. Vacuum, Not Less Than 800 Mbar. Reinforced Suction Hose With An Internal Diameter Of 50 Mm For A Motor Pump. Area Of Application: Pumping Technical Liquids, Pumping Thick Food Masses. Temperature Range: From -15 °C To +65 °C. Material: Pvc. Construction: Smooth Inner Wall, Galvanized Spiral. Transparent Suction And Pressure Hose Made Of Polyvinyl Chloride. Reinforced With A Metal Spiral Made Of Galvanized Steel, Which Is Resistant To Moisture. The Weight Of The Hose Is From 0.16 To 6.35 Kg/M, It Can Withstand Significant Loads, High Pressure, And Vacuum. This Is An Industrial Hose That Is Characterized By Flexibility., Plumbing Flax Ssk No. 11 Vs Gost 10330-76. Combed. Plumbing Flax - For Sealing Threaded Connections. Top Grade. A Pure Natural Product Made From Fine, Uniform, Long-Fiber, Combed Flax, Obtained From The Flax Stalk., Technical Plate 5 Mm (1000X5000 Mm, ~41.1 Kg). Characteristics And Description Type - Non-Shaped Technical Plates. Product Condition - New Thickness: 5 Mm (±0.9 Mm), Tmkshch – Heat-Freeze, Acid-Alkali Resistant Class: 2 – Working Pressure Up To 0.1 Mpa Hardness: 65 Shore A (±5 Units) Type: H – Non-Shaped Plate Made On Continuous Vulcanizers Type: I - Rubber Plate Weight 1 Sq.M.: No Less Than ~8.0 Kg The Technical Plate Is Intended For The Manufacture Of Rubber Products Used To Seal Fixed Joints, Prevent Friction Between Metal Surfaces, To Absorb Single Impact Loads, And Also As Gaskets And Floorings Working Environment: Indoor Air, Containers, Vessels; Nitrogen; Inert Gases; Fresh, Sea, Industrial, Waste Water Without Organic Solvents And Lubricants; A Solution Of Salts With A Concentration Up To The Saturation Limit; Acids And Alkalis With A Concentration Of No More Than 20%. Operable From -30°C To +80°C. Appearance: Smooth Surface, Black, Gland Packing Agi 10X10 Mm. Omental Packing Agi. Asbestos, Wicker, Glued With Graphite, Inhibited. For Filling Stuffing Box Chambers For The Purpose Of Sealing Movable And Fixed Joints Of Various Machines And Devices Operating In Different Environments With An Acidity Of The Working Environment (Ph) Of 4-14. Working Media: - Air, Nitrogen, Inert Gases: Pressure Up To 20 Mpa, T Up To + 325 C, Sliding Speed Up To 2 M/S., - Water Steam: Pressure Up To 35 Mpa, T Up To + 565 C, Sliding Speed Up To 2 M/S. - Petroleum Products: Pressure Up To 32 Mpa, T Up To + 450 C, Sliding Speed Up To 2 M/S., - Water, Feed Water, Organic Products: Pressure Up To 2 Mpa, T° Up To + 70 ° C, Sliding Speed Up To 2 M/S When Sealing Valves, Sliding Speed Up To 15 M/S When Sealing Pumps., - Ammonia Liquid And Gaseous: Pressure Up To 32 Mpa, T From -70 To + 150 C, Sliding Speed Up To 2 M/S When Sealing Valves, Sliding Speed Up To 15 M/S When Sealing Pumps., - Liquid And Gaseous Petroleum Products And Aggressive Media Pressure Up To 37 Mpa, T Up To + 600 C, In Fixed Joints Of Devices. Material - Graphite, Max. Temperature - 600°C. Gost 5152-84., Gland Packing Agi 8X8 Mm. Omental Packing Agi. Asbestos, Wicker, Glued With Graphite, Inhibited. For Filling Stuffing Box Chambers For The Purpose Of Sealing Movable And Fixed Joints Of Various Machines And Devices Operating In Different Environments With An Acidity Of The Working Environment (Ph) Of 4-14. Working Media: - Air, Nitrogen, Inert Gases: Pressure Up To 20 Mpa, T Up To + 325 C, Sliding Speed Up To 2 M/S., - Water Steam: Pressure Up To 35 Mpa, T Up To + 565 C, Sliding Speed Up To 2 M/S. - Petroleum Products: Pressure Up To 32 Mpa, T Up To + 450 C, Sliding Speed Up To 2 M/S., - Water, Feed Water, Organic Products: Pressure Up To 2 Mpa, T° Up To + 70 ° C, Sliding Speed Up To 2 M/S When Sealing Valves, Sliding Speed Up To 15 M/S When Sealing Pumps., - Ammonia Liquid And Gaseous: Pressure Up To 32 Mpa, T From -70 To + 150 C, Sliding Speed Up To 2 M/S When Sealing Valves, Sliding Speed Up To 15 M/S When Sealing Pumps., - Liquid And Gaseous Petroleum Products And Aggressive Media Pressure Up To 37 Mpa, T Up To + 600 C, In Fixed Joints Of Devices. Material - Graphite, Max. Temperature - 600°C. Gost 5152-84.
