Bids Are Invited For Hiring A Company To Acquire Equipment To Adapt An Ambulance For The Transport And Removal Of Patients To Meet The Demand Of The Health Department Of Boa Esperança Do Iguaçu/Pr.

Ambulance Transport Lung Ventilator Microprocessed Mechanical Ventilation Equipment For Adult, Pediatric And Neonatal Patients, With The Following Minimum Characteristics. It Must Have A Screen Of At Least 5 Inches With A Minimum Resolution Of 480 X 272, For Monitoring At Least 1 Curve, And Values ​​On The Monitoring Screen. Equipment Must Be Compact And Have Its Own Air Source Generated Through A Venturi System And Allow Intra-Hospital And Ambulance Transport. It Must Allow Use In Invasive And Non-Invasive Ventilation. Possibility Of Including The Capnography Parameter In The Future. Must Be Capable Of Monitoring At Least 9 Parameters And An Inspiratory Flow Of At Least 100 L/Min Ventilatory Modes Must Have At Least The Following Ventilation Modes Or Compatible Ventilatory Modes: Volume Controlled/Assisted Ventilation; Pressure Controlled/Assisted Ventilation; Pressure Support Ventilation; Ventilation At Two Pressure Levels (Binlevel, Duolevel, Bilevel Or Similar) Non-Invasive Ventilation; Continuous Positive Airway Pressure - Cpap; Back Up Ventilation At Minimum In Spontaneous Modes; Control System: Have Control And Adjustment For At Least The Parameters With The Ranges: Inspiratory Pressure And At Least 0 To 30 Cmh20; Tidal Volume Of At Least Between 50 To 2000Ml; Respiratory Rate Of At Least 50 Rpm; Peep From At Least 0 To 20 Cmh20; Inspiratory Sensitivity Per Flow Of At Least Between 1 To 15 Lpm; Wire2 From At Least 45 To 100%. Inspiratory Flow Of At Least 100 L/Min Monitoring System: Must Monitor At A Minimum Airway Pressure, Tidal Volume, Minute Volume, Respiratory Rate Alarm System With At Least: High And Low Inspiratory Pressure Alarms, Minute Volume (High And Low) Respiratory Rate (High And Low) Apnea, Lack Of Power, Low Battery Charge And For Fan Unable To Work, Or Similar. It Must Be Automatic Bivolt And Have The Possibility Of Inserting 1 Or 2 Batteries With Autonomy..., Parenteral Infusion Pump, Compatible With Universal Equipment That Is Easily Accessible On The Brazilian Market. It Must Have The Following Minimum Characteristics: Have A Linear Peristaltic Pumping Mechanism; Fixing Clamp On Iv Support; Infusion Rate 0.10 - 1200 Ml/H With Increment Of 0.01 Ml/H, Infusion Accuracy Of ± 5%, Vtbi 0 - 9999.99 Ml With Increment Of 0, Volume To Infuse 0-3600 Ml, Kvo Rate 0-10 Ml/H, Manual And Automatic Bolus Rate Of 0.10 - 1200 Ml/H, Infusion Modes: Rate Mode, Drip Mode, Time Mode, Body Weight Mode, Drug Library Mode, Intermittent Mode, Dose Mode; Purge Rate: 0.10-1200 Ml/H Purge Vtbi: 0-9999.99 Ml; Air Bubble Detection: Ultrasound Sensor Detection With 6 Air Levels In Line 13 Occlusion Levels; Adjustable Occlusion Pressure; Alarms: Use Battery, Door Open, Occlusion, Almost Ready, No Operation, Infusion Completion, Low Battery, Discharged Battery, Malfunction; Functions: Anti-Bolus (Decreases Unwanted Bolus Volume After Occlusion Removal) Can Change Flow Rate And Vtbi Without Interrupting Infusion, Intelligent Pressure Detection Alarm, Anti-Reverse Detection, History Storage Space For More Than 1000 Patients, Can Be Transmitted To Computer, Real-Time Display Infusion Rate/Drip Rate, Vtbi, Infused Volume, Time, Etc. Waiting Function: 1 Min - 24 Hours Adjustable