Bids Are Invited For Registration Of Prices For Acquisition Of Whiteboards And Cork Boards, Through The Municipal Education Secretariat – Educar

Whiteboard 3.00X1.20Large Whiteboard - 3.00 Dimensions And Tolerances: Width: 3000 Mm +/- 10 Mm. Height: 1200 Mm +/- 10 Mm. Panel Thickness: 15 Mm +/- 0.8 Mm. Edge Ribbon: 2 Mm (+/- 0.2 Mm) With Milled Finish With A Minimum Radius Of 2 Mm. Length Of The Metallic Rail To Support The Pens: Minimum 800 Mm. Construction Features: 15 Mm Thick Mdf Panel, Covered On The Front Face With 1 Mm Thick High Pressure Melamine Laminate, Blackboard Finish, Glossy White. Rear Side Coated With Balancing Plate: 0.6 Mm Phenolic Counter-Plate, Or Low Pressure Melamine Laminate - Bp, White. All Panel Edges Must Be Covered With Maple Tape, 2.0 Mm Thick, Gray Color, Glued With Hot Melting Adhesive. Panel Fixing Brackets Printed In Cold Rolled Steel Sheet, Plate 14 (1.9 Mm). Set For Attaching The Supports To The Panel Composed Of Steel Screws, Metric Thread, Cylindrical Head, Single Slot, M6 Set For Fixing The Supports To The Wall Consisting Of Steel Screws, Superb Thread, Hexagonal Head, Diameter = 1/4 Metal Rail For Pen Support Made Of Cold-Rolled Steel Sheet, 18 Sheet (1.2 Mm), Folded And Stamped, Free From Sharp Edges. Painting Of Metallic Elements In Powder Paint, Glossy, In Gray Color. Welds Must Have A Smooth And Homogeneous Surface And Must Not Present Sharp Points, Rough Surfaces Or Scuffs. Eliminate Spatters And Volumes Of Welding And Metallic Burrs, Whiteboard 1.50 Dimensions And Tolerances: Width: 1500 Mm +/- 10 Mm. Height: 1200 Mm +/- 10 Mm. Panel Thickness: 15 Mm +/- 0, Glossy White. Rear Face Coated With Balancing Plate: Against 0 Phenolic Plate, Glued With Hot Melting Adhesive. Panel Fixing Brackets Printed In Cold Rolled Steel Sheet, Rough Or Scorched Surfaces. Eliminate Spatter, Weld Volumes And Burrs Metal, Cork Boardcork Board - 1, 20Minimum Specification; Cork Wall Picture - Size: 1.50 (W) Comes With Installation Kit., 10/29/2025 - 12:09:39