Request For Possible Future And Installment Purchase Of Arms, Luminaires, Electrical Material And Other Items, In Accordance With The Specifications, Quantities And Quantitatives Contained In The Terms Of Reference With Aim To Meet The Needs Of The Municipal Works Secretariat.

Hot-Dip Galvanized Rotating Photoelectric Relay Base, Arm For Luminaires That Support Led Luminaires From 98W To 239W, Heavy, Straight, Hot-Dip Galvanized Carbon Steel Tube As Per Nbr 6323, With Or Without Seam Abnt 1010 To 020, External Diameter Of 60, 30Mm, Length Of 1.00 Meter, Rectangular Shoe In Hot Galvanized Carbon Steel Nbr 6323, Shoe Size 35Cm, With Two Holes, One Of Which Is A 18Mm Long Obi Hole, Must Be Indelibly Engraved With The Month And Year Of Manufacture And The Manufacturers Brand, Approximate Weight 11, 50Kg. Each Arm Must Be Adequately Identified In A Legible And Indelible Manner. Tube: Carbon Steel, Abnt 1010 To 1020, With Or Without Seam, Minimum Tube Wall Thickness 3Mm. Base: Carbon Steel, Laminated. The Zinc Coating On Public Lighting Arms Must Meet The Following Conditions: A) Zinc Must Be Of The Common Type Defined In Nbr 5996, With A Maximum Of 0.01% Aluminum; B) Zinc Plating Must Be Carried Out By Hot Immersion, In Accordance With Nbr 6323; C) The Zinc Layer Must Be Adherent, Continuous And Uniform, And Must Withstand The Following Numbers Of Immersions In The Uniformity Test: - Flat Surfaces: 6 Immersions; - External Edges And Threads: 4 Immersions; - Internal Threads: Not Required. D) Zinc Plating Must Be Done After Manufacturing, Drilling, Welding And Marking The Parts. Excess Zinc Should Be Removed Preferably By Centrifugation Or Beating. The Protrusions Must Be Filed Or Ground, Maintaining The Minimum Thickness Of The Zinc Layer; E) Before 48 Hours After Zinc Plating, The Pieces Must Not Be Exposed To The Weather., Length Of 3.00 Meters, Laminated, . The Zinc Coating Of Public Lighting Arms Must Meet The Following Conditions: A) The Zinc Must Be Of The Common Type Defined In Nbr 5996, Length Of 4.00 Meter, Cable 2.5 Mm², Flexible, Inmetro Seal, Colors Blue, Green, Black, Red 750V Certified In Inmetro, 21/10/2025 - 09:23:57, 21/10/2025 - 09:23:58, Cable 1, Parallel Cable, White 2X2, 5Mm² 300V Certified By Inmetro, White 2X1, Pp Cable 2X2, 50 Mm², Inmetro Seal 1Kv Certified By Inmetro, Pp Cable 2X1, Multiplexed Cable Multiplex 2X10mm Duplex, Multiplexed Cable Triplex 3X10mm, Multiplexed Cable Quadriplex 4X10mm, Key For Lighting Control With 2X30a Circuit Breaker, Key For Lighting Control With 2X60a Circuit Breaker, 10 Mt High Fusion Tape, 20 Meters Black Insulating Tape, 70 W Tubular Sodium Vapor Lamp, Photoelectric Relay In Normally Open – Bivolt, Led Public Lighting Luminaire With Maximum Power 60W – Supplied Without Relay Base - In Aluminum Injected At High Pressure Or Extrusion, Finished With Paint Electrostatic In Gray Color, Degree Of Protection For The Total Set Ip-66 (Both The Block And The Compartment), Robust Construction Resistant To Severe Vibrations And Wind Action, Resistant To Mechanical Impact Ik-08. Attachment System To The Arm With Tube Entry Up To 60.3Mm. Color Temperature 5000-6500K Maximum Power 60W, Minimum Efficiency 140Lm/W; Minimum Effective Luminous Flux Of 8,400 Lumens; Color Rendering Index 70 Or Greater; Power Supply 127-277V Or Higher Variation Range, Frequency 50 / 60Hz, Minimum Power Factor (0.92), Have Dps Of At Least 10Ka, Without Relay Socket On The Body Of The Luminaire, Must Have A Minimum Useful Life Of 50,000 Hours. Must Have A Five-Year Warranty Against Manufacturing Defects Luminaires Certified By Inmetro Will Be Accepted