Request For Quotation Purchase Of Other Supplies, Soap And Detergents And Spare Parts (Carefully Read The Technical Specifications Of The Goods, The Availability Of Documents Confirming The Quality Of The Goods Supplied)

Sink Faucet, Faucet Weight No Less Than 850 Grams!!! Single-Lever Flag For Hot And Cold Water, Spout Type Is Rotary, Cartridge-Type Mixer, Durable Body Resistant To Corrosion, Sudden Changes In Pressure And Changes In Water Temperature, Spout Length From The Axis Within 12-15 Cm. Horizontal Installation, Body Material Is Brass, Color And Shape Should Be Agreed With The Receiving Party Before Sending, Attaching Photos And Videos. Upon Delivery, All Faucets Will Be Tested Using Pressurized Water And If Defective, All Faucets Will Be Returned For Replacement., Metal Brush For Dishes, Solid Laundry Soap 200G, Starter Mtz 74.3708-01 12V, Power 3.3 Kw, Direction Of Shaft Rotation Is Right, Number Of Teeth 10, Starting Power 2.55 Kw, Rated Voltage 12V, Winding Pulling Current 60A, Holding Current., Toilet Valve With Float And Side Water Inlet Valve (Without Fittings), Single-Level Outlet Valve With Side Installation On The Toilet Flush Cistern. Glass-Type Valve Float With Adjustment Of Water Filling By Moving The Glass Up Or Down. Before Delivery, Send A Photo And Agree With The Customer., Galvanized Bucket (The Zinc Coating Is Continuous, Without Cracks And Is Not Subject To Peeling During Operation; Due To The Galvanized Surface, The Metal Is Protected From Corrosion, Which Extends The Life Of The Product, Especially When Used For Working With Water Or In Conditions Of High Humidity), 12 Liters, To Be Agreed With The Customer, Mixer Connection (Flexible Rubber Non-Toxic Tube In A Metal Braid Made Of Stainless Steel, One End Is A Steel Nut With A Gasket With A Diameter Of 15 Mm, On The Other Side There Is An M-10 Fitting With An Annular Rubber Gasket, The Connection Must Have A Length Of At Least 60 Cm And Be Supplied In Pairs With Connection Connections Of Different Lengths, 50% Long And 50% Short), To Be Agreed With The Customer., Kitchen Sponge (For Washing Dishes, Durable, Made Of Large-Pored Foam Rubber), Ball Valve - Diameter 20, Semi-Through For Hot Water, Internal Thread D20 Mm, Body Material Brass, Lever Handle, Weight Not Less Than 0.32 Kg. The Ratio Of The Clear Area Of ​​The Valve Bore To The Cross-Sectional Area Of ​​The Supply Pipeline Is % 94 (Full Bore Valve), To Be Agreed With The Customer., Heating Element Of Burner Ket 0.12 For Electric Stove Abat 1600W.124649 (Set Of 2 Pieces, Dimensions 185*310, 250*370, Power 3000W, Material Stainless Steel, Length 37Cm, Heating Element-155-9-8.5/1.40T230 (1.4Kw) - Voltage 220-230V, Screw Connection M4, Product Weight 0.37 Kg; Ten-182-9-8.5/1.60 T230 (1.6 Kw) - Voltage 220-230V, M4 Screw Connection, Product Weight 0.44 Kg, Power 1.6 Kw., White 0.9L, Bath Faucet (Universal, Two-Jaw, Faucet With Fine Thread, Brass Material, Wall Installation Type. Equipment: Faucet, Brass Eccentrics, Decorative Reflectors, 1.5 M Hose, Wall Mount, 1-Mode Watering Can), The Key Characteristic Is High Water Throughput, Weight Not Less Than 1.3 Kg. (To Be Agreed With The Customer), Washing Powder For Hand Washing 350-400G, Universal Spiral In Ceramic Beads For Kes-0.12 (Power 1.5 Kw, Rated Voltage 500 V, Beads Bf-1-8/10, Length Of Spiral With Beads 1.4 M, Product Weight 0.56 Kg), To Be Agreed With The Customer, Led Lamp E27 Warm Light 20W (E27 Base, Led Color White, Power 20W, Voltage 220V, To Be Agreed With The Customer), Ball Valve - Diameter 15, Semi-Through For Hot Water, Internal Thread D15mm, Body Material Brass, Lever Handle, Weight Not Less Than 0.32 Kg. The Ratio Of The Clear Area Of ​​The Valve Bore To The Cross-Sectional Area Of ​​The Supply Pipeline Is % 94 (Full Bore Valve), To Be Agreed With The Customer., White Table Paper Napkins, Two-Layer, Moisture-Resistant, Dimensions 24Cm*24Cm, Density 23+-1G/Sq.M, At Least 100 Pieces Per Pack, Garbage Bag (The Volume Of The Bag Must Be At Least 30 Liters And Withstand A Weight Of At Least 20 Kg, The Number Of Bags Per Roll Is At Least 30 Pieces, The Strength Of The Seams Must Be At Least 0.7 Of The Polymer Strength)