Measuring Pressure Transducer Pd100-Di-0.6-111-0.5; Technical Characteristics: Measured Pressure Range 0-25Kgf/Cm2; Accuracy Class - 0.5; Output - 4-20Ma; Power Supply - 12-36V; Execution - General Industrial; Membrane Material Stainless Steel Aisi316l; Connection To The Processor - M20*1.5 Fitting, Din43650a Connector; Socket Included Without Indication; Ambient Temperature -40 To +100C; Overload 200%, Calibration Interval 5 Years; Degree Of Protection - Ip65. Gost 22520-85., Indicator Device Adi-0.1.1 For Indicating The Pressure Value In The Boiler Furnace. The Device Is A Quantity Meter, With A Built-In 220V Unit Or With A Separate Power Supply 24. With Two Built-In Dry Contact Relays With A Maximum Load Of 5A, 250V. Current Input 4-20Ma. Current Output 4-20Ma. The Device Indication On A Three-Digit Indicator Is Proportional To The Input Signal. Gost 27537-87., Intermediate Relay Mpr-4/220V. Gost 11152-82, Vacuum Meter Adr(±) 0.125.4.1 Output Signal 4-20Ma. Gost 22521-85., Power Supply Bp24.3. Supply Voltage 220V. Input Voltage 24V.2.5A Type Of Climatic Version Uhl4. Operating Temperature Range From -20°C To +50°C With Relative Humidity Not Exceeding 80% And Atmospheric Pressure From 86 To 106.7 Kpa. 35Mm Din Rail Mounting. With Relay, Contact Load 6A, 240V. Year Of Manufacture 2024. State Verification 2024. Gost 15150-69. New, Never Used. A Passport Is Required., Measuring Pressure Transducer Pd100-Di-0.6-111-0.5; Technical Characteristics: Measured Pressure Range 0-1Kgf/Cm2; Accuracy Class - 0.5; Output - 4-20Ma; Power Supply - 12-36V; Execution - General Industrial; Membrane Material Stainless Steel Aisi316l; Connection To The Processor - M20*1.5 Fitting, Din43650a Connector; Socket Included Without Indication; Ambient Temperature -40 To +100C; Overload 200%, Calibration Interval 5 Years; Degree Of Protection - Ip65. Gost 22520-85.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
