Tenders Are Invited For Plasterboard Works – Drywall Work - New Building Impc (Pharmacy), Building 2441, Beethovenstraße, 38106 Braunschweig

Plasterboard Works – Drywall Work - New Building Impc (Pharmacy), Building 2441, Beethovenstraße, 38106 Braunschweig. Covering Work Exposed Concrete Surfaces In The Area Of ​​Adjacent Wall And Ceiling Surfaces Must Be Covered With Foil And Suitable Adhesive Material. Sample Areas Manual Samples And Sample Areas Must Be Created For The Casing In The Changing Rooms, The Acoustic Plaster And The Ceiling Sails. Wall Surfaces The Drywall Walls Are Mounted Directly Onto The Unfinished Floor And The Unfinished Ceiling With Felt Insulation Strips Underneath. The Ceiling Connection Is Made With A 4-Fold Plaster Bar. For The Installations In The Wall Surfaces, They Are First Covered On One Side, Then The Installations Are Carried Out And Finally The Wall Surfaces Are Insulated And Closed. The Wall Surfaces Must Be Filled To Quality Level Q2 And Handed Over To The Painter An. Shadow Gaps Must Be Created In The Area Of ​​Exposed Concrete Ceilings And Walls. The Door Openings Must Be Designed With Reinforcements That Must Be Attached To The Bare Floor And The Bare Ceiling. Due To The Many Drywall Openings, Horizontal Reinforcement Is Necessary In Many Areas. Some Of The Supports And/Or Small Concrete Areas Are Covered With The Second Layer Of Drywall And Must Be Glued To These Areas Using A Suitable Plaster Filler. The Drywall Surfaces Are Filled By The Painter An And Provided With Fleece Wall Covering. Ceiling Surfaces Four Different Drywall Ceilings Are Installed, Smooth Ceiling Surfaces Without Requirements, Smooth Ceiling Surfaces For Wet Areas, Perforated Ceiling Surfaces And Ceiling Surfaces With Acoustic Plaster. Inspection Flaps Must Be Installed In The Ceiling Areas And Filled With The Same Ceiling Cladding. The Ceiling Areas With Perforated Drywall Panels Have A Shadow Gap All Around And A Filled Ceiling Frieze. Openings For Built-In Lamps, Swirl Outlets, Poppet Valves, Etc. Must Also Be Made. The Built-In Lamps Will Penetrate The Substructure Due To Their Installation Depth. Cable Cladding In The Foyer, Cable Cladding Must Be Made Of Smooth Plasterboard. In Stairwell 02 These Must Be Created In F90. An Acoustically Effective Enclosure Made Of Fiberglass Panels Must Be Installed In The Changing Rooms, Which Is To Be Delivered In The Color Ncs 0507-Y20r, Beige According To The Sample. Wall Lintel For The Installation Of Glass Partition Walls, Non-Supporting Walls Must Be Constructed As Lintels. To Accommodate The Glass Partitions, Square Tubes Must Be Inserted Into The Lower Profile. These Must Be Mounted On The Adjacent Wall Surfaces Using Headboards. Glass Sword For The Installation Of A Glass Sword, A Joint Must Be Formed For The Holder. Facing Shells The Facing Shells Installed By Sanitary An Are Covered With H2 Drywall Panels After Rough Installation. Broken Down, There Are Approximately The Following Areas: 340 M² Covering Work 3100 M² Wall Areas 1000 M² Ceiling Areas 81 Pcs. Ceiling Sails 80 M² Acoustic Plaster 150 M Cable Cladding 8 M Movement Joints 45 M Edge Protection Profiles 1450 M Shadow Gap