Low Cabinet 02 Doors - Approximate Measurements: 745Mm Height, 800Mm Width And 500Mm Depth; Hinges In Zamac, Opening 270 Degrees, With Vertical And Horizontal Adjustment Through Eccentric Screws With Nylon Locking Device;- Lock With Superior Simultaneous Locking, With 02 (Two) Folding Keys And Unique Secret;- With Chromed Zamack Handles;- All Parts Of The Cabinet Must Be Fastened Using Minifix Screws With Steel Bushings And In Their Internal Part (Superior E Bottom);- The Cabinet Must Be Reinforced With Nylon Plugs;- Top Made From Medium Density Particle Board (Mdp), 25Mm Thick, Covered On Both Sides With Low Pressure Melamine Laminate (Bp);- Sides, Bottoms, Doors, Base And Internal Shelves Must Be Made From Particle Board. Medium Density (Mdp), 18Mm Thick, Covered In Low Pressure Melamine Laminate (Bp); Must Be Perforated Symmetrically, Enabling The Fitting Of Steel Pins To Adjust The Height Of The Shelves; - On The Inside, The Cabinet Must Have 01 (One) Shelf With 18 Mm Thickness, Which Will Be Supported By Means Of Steel Pins Fixed To The Sides Of The Cabinet; - Metallic Structure For The Base (Frame) Made Of Sae 1010/1020 Steel Tube Measuring 20X40x0.90Mm Cut Into 1/2 Square, Equipped With Non-Slip Leveling Shoes Made Of Injected Polypropylene And Metal Rod With Thread Adjustment. The Cabinet Body Must Be Fixed To The Structure Using M6 Screws M6x13mm Metal Plugs; Backrest, Tall Armrests, Castors In Nylon, Seat And Back Executive Model In Injected Foam With A Minimum Of 50Mm Thickness, Being, Seat With Minimum Measurements Of L430mm Rivera, Flexform Or Similar 1E Line., 10/24/2025
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
