Tenders Are Invited For Electrical Installation Work Of Heating And Other Electrical Building-Equipment – ​​New Construction Of 4 Fire Stations - Heating And Plumbing Work

Electrical Installation Work Of Heating And Other Electrical Building-Equipment – ​​New Construction Of 4 Fire Stations - Heating And Plumbing Work. The Subject Of This Tender Is The Delivery And Construction Of The Entire Heating Installation, Consisting Of Heat Generation, Distribution And Transfer. Heat Is Generated Via A Cascade Of Mono-Energetic Air/Water Heat Pumps That Are Installed On The Roof. Heat Is Distributed Via Two Buffer Storage Tanks: A Low-Temperature Storage Tank Supplies The Building Heating, While A High-Temperature Storage Tank Feeds The Fresh Water Station For Hot Water Preparation, Which Is Also Included In The Scope Of Services. The Temperature Level Is Raised Using An Electric Heating Cartridge. The Heat Is Given Off As Floor Heating: In The Vehicle Hall Using On-Site Industrial Floor Heating And In All Other Rooms Using Underfloor Heating. In Addition, The Heating Register Of The Air Conditioning System Is Supplied Via The Heating System. The Pipe Network Is Made Of Stainless Steel In A 2-Pipe System. All Pipes Must Be Insulated In Accordance With The Geg And Lar Specifications. In Visible Areas, Proper Installation With Special Demands On Execution Is Required. If Necessary, Additional Sheathing Is Provided Here. The Entire System Is Operated Via Individual Room Control And Must Be Hydraulically Balanced And Documented. The Building Is A Solid Wood Construction. This Is A Single-Story Building. The Upper Edge Of The Attic In The Area Of ​​The Social Building Is Around 4.15 M Above Ground, The Attic Of The Vehicle Hall Can Be Assumed To Be Around 6.35 M. The Vehicle Hall Is Made Of In-Situ Concrete.