Tenders Are Invited For Szp.281.88.2025 - Construction Works In The Design And Build System - Modernization Of The Underground Route At The Czmp Institute In Łódź

1. The Subject Of The Order Are Construction Works In The Design And Build System - Modernization Of The Underground Route At The Czmp Institute In Łódź - Adaptation To Increase The Space For Receiving Patients In Emergency Situations.2. Financing Under Contract No. Wbizk/326/2025/P For The Granting Of A Targeted Subsidy For The Task Consisting In The Implementation Of The Olioc Program In 2025 By The Institute Centrum Zdrowia Matki Polki.3. The Modernization Of The Underground Communication Route Between The Pediatric Block And The Kitchen And Storage Building Is Intended To Adapt It To The Possibility Of Using It As Additional Space For Patients In The Event Of External Threats. The Total Length Of The Route Is Approximately 300 M. The Investment Increases The Hospitals Resilience In The Event Of An Increased Number Of Victims And Other Threats. The Hospital Is Included In The Provincial Plan To Expand The Bed Base For The Civilian Population And The Armed Forces. List Of Works To Be Performed: 1.1. Ensuring The Tightness Of The Roof Covering Of The Routes - Clean Route. To Ensure The Tightness Of The Routes, The Following Should Be Done: A) Tidying Up The Area Of ​​The Route With Tarpaulins, Profiles, Plastic, Steel Elements And Pallets, Including Removal And Disposal; B) Dismantling The Necessary Steelworks On The Route; C) Removing The Layers Of Roofing Felt On The Flat Surface Of The Route Roof, Along With Removing Vegetation; D) Cleaning The Surface Exposed Ceiling Structure Along With Filling The Gaps In The Structure;E) Mechanical Cleaning Of The Surfaces Of Steel Elements (Including Posts) And Protecting Their Surfaces With Anti-Corrosion Paint;F) Construction Of Envelope Slopes (Slope Wedges) Ensuring Water Outflow To The Newly Designed Overflows On The Attic;- Slope Wedges Should Be Made On Spacers Allowing Moisture To Evaporate From The Existing Layers;- It Should Be Planned Ventilation Chimneys;G) Construction Of A Roof Covering Made Of Underlay Felt And Covering Felt On The Slopes Of The Flat Surface Of The Tact (With All Flares);H) Construction Of Overflows In The Attic Wall (Made Of Rectangular Pipes);- Quantity According To The Contractors Design;I) Construction Of A New Sheet Metal Roof Covering On The Surface Of The Dome Of The Street (With All Flares);- Sheet Metal Roofing Has Cover The Skylights (Not Intended For Disassembly) And Be Properly Tied With The Roofing Felt On The Flat Side Of The Route And Turned Up To The Appropriate Length With The Appropriate End Of The Sheet Metal To Ensure Water Drainage. The Ordering Party Allows For Bricking Up The Skylights With The Wall Finished With Roofing Felt Or Façade Plaster After The Designer Confirms That The New Wall Does Not Constitute A Load That Poses A Threat To The Structure; - An Appropriate Substructure Should Be Provided Under The Sheet To Ensure Its Stiffness; - Appropriate Spacers, Battens And Chimneys Should Be Provided Under The Sheet To Ensure The Possibility Of Eva