Tenders Are Invited For Change Of Use And Reconstruction Of The Premises Of The Former Gs Sch Store For The Needs Of The Volunteer Fire Department Entitled: Expansion And Modernization Of The Volunteer Fire Department Station In Marianka

Change Of Use And Reconstruction Of The Premises Of The Former Gs Sch Store For The Needs Of The Volunteer Fire Department. Reconstruction Of The Buildings Interior Is Planned, Along With Changing The Use Of The Former Commercial And Service Premises Into Rooms For The Operation Of The Volunteer Fire Department In Marianka. As Part Of The Planned Reconstruction, It Is Envisaged To Create Door Openings In The Load-Bearing Wall Between The Existing Rooms Of The Garage And The Former Shop, And Then To Create Bathrooms, Toilets, A Clean Cloakroom And A Dirty Cloakroom For The Volunteer Fire Department. Additionally, As Part Of The Work, Wall Partitions Should Be Secured To The Rei60 Level Between Two Fire Zones. Creating Separate Fire Zones Requires The Removal Of One Of The Windows In The Garage And The Replacement Of The Window In The Room Adjacent To The Garage With A Window Meeting The Ei60 Resistance Class. As Part Of The Task, It Is Planned To Install Sanitary Installations. The Designed Cold Water Installation Should Be Connected To The Existing Internal Cold Water Installation. The Installations Should Be Made Of Multilayer Pipes Of The Pert/Al/Pert Type System With An Overlap-Welded Aluminum Pipe Located In The Middle Of The Cross-Section. Cable Passages Through Walls Separating Fire Protection Zones. Be Made By Using Certified System Transitions Intended For Non-Flammable And Flammable Pipes, Other Cable Passages Through Building Partitions Should Be Made In Protective Steel Sleeves Enabling The Cable To Move Freely In The Wall. After Completing The Installation Of All Devices And Fittings, Check The Completeness And Correctness Of Construction And Operation Of Safety Devices. The Installation Should Be Rinsed And Pressure Tested (Pressure Not Less Than 0.9 Mpa) And Disinfected. The Discharge Of Domestic Sewage From The Building Was Designed To The Existing Internal Sanitary Sewage System In The Building. The Sanitary Sewage System Should Be Made Of Pvc-U/Pp Pipes. The Method Of Routing And The Diameters Of The Approaches Are Shown On The Projections Of The Sanitary Sewage System, Slopes Should Be Maintained In Accordance With Current Industry Requirements. The Project Envisages The Use Of Electric Heaters For Heating Purposes. The Selection Of The Power Of Individual Radiators Is Presented In The Graphic Part In Figure 3.2. The Task Should Also Include Work In The Electrical Industry, I.E. - Installation Of Distribution Circuits And 230/400V Plug Sockets, 1) Installation Of Basic, Emergency And Evacuation Lighting, 2) Installation Of Main And Local Equalizing Connections, 3) Lightning Protection Installation. The Material Scope Of The Study Is Specified In The Detailed Description Of The Subject Of The Order And The Construction Documentation Constituting The Additions Listed In § Xxiii Of The Swz.