Tenders Are Invited For Renovation Of The Facade Of The Building At Ul. Kłobucka 16 In Warsaw.

Renovation Of The Facade In The Building At Ul. Kłobucka 16, Belonging To The Housing Stock Of The Ursynów District Of The Capital City Of Warsaw. Warsaw. Due To The Fact That The Works Concern A Multi-Family Residential Building, Construction Works May Be Taxed At A Preferential Rate Of 8% Vat.1. Renovation Of The Facade - Disassembly And Reassembly After Insulation Of Boards, Etc., - Protection Of Windows, Doors, Glass Balustrades, Balcony Surfaces, Etc. (According To The Description And Measurements In The Bill Of Quantities), - Dismantling Of The Wall Covering With Tiles. (In Accordance With The Description And Measurements In The Bill Of Quantities), - Preparation Of The Old Subfloor For Insulation Using The Light Wet Method - Mechanical Cleaning And Washing. (According To The Description And Measurements In The Bill Of Quantities), - Installation Of Baseboards Or Initial Strips (Installation/Repair Of The Starting Profile After Forging Tiles), - Preparation Of The Old Substrate For Insulation Using The Light-Wet Method - Checking The Adhesion Of The Adhesive Mortar To The Substrate, - Checking The Load-Bearing Capacity Of The Substrate For Insulation Using The Light Method - Load-Bearing Capacity Of Dowels, - Insulation Building Walls With Polystyrene Boards - Fastening The Polystyrene Boards With Dowels To The Aerated Concrete Walls (It Was Assumed That The Existing Façade Should Be Doweled After Cutting The Tiles With An Estimated Number Of Additional Dowels ~2 Pcs./M²), - Preparation Of The Old Substrate For Insulation Using The Light-Wet Method - Single Priming, - Preparation Of The Substrate For A Jointless Insulation System - Leveling Surface With Leveling Mortar, - Insulation Of Building Walls Using The Light Method - Installation Of Window Strips With Mesh, (In Accordance With The Description And Measurements In The Bill Of Quantities), - Insulation Of Building Walls With Styrofoam Boards Using The Light-Wet Method Using Ready-Made Adhesive Mortars - Gluing One Layer Of Fiberglass Mesh On The Walls, - Insulation Of Walls Buildings With Styrofoam Boards Using The Light-Wet Method Using Ready-Made Adhesive Mortars - Gluing One Layer Of Mesh On The Jambs (In Accordance With The Description And Measurements In The Bill Of Quantities), - Insulating The Building Walls With Styrofoam Boards Using The Light-Wet Method Using Ready-Made Adhesive Mortars - Protection Of Convex Corners With Metal Angles (In Accordance With The Description And Measurements In The Bill Of Quantities). Bill Of Quantities), - Thin-Layer Facade Plaster Made Of Mineral Plaster, Made By Hand On A Previously Prepared Substrate - Applying A Base Plaster Mass (Colors To Be Agreed With The Ordering Party At The Implementation Stage), - Sticking And Tearing Off Templates With An Area Of Over 1.0 M² - Brick Shape (Colors And Exact Shape To Be Agreed With The Ordering Party At The Stage Of Implementation), Implementation), - Thin-Layer Facade Plaster Of Mineral Plaster Made