Tenders Are Invited For Installation Services Of Machinery And Equipment – Hookup

Installation Services Of Machinery And Equipment – Hookup. At The University Of Siegen, Gas Supply And Vacuum Exhaust Installation Work For The Permanent Installation Of Existing Large Devices (3 X Pvd, Cvd, Pecvd, Ald, Rie,...) Is To Be Carried Out Within The Clean Room (Total Area Grey/White: 600M²) Of The Incyte Research Building. The Installations Require The Systems To Be Connected To The Existing Gas Network With The Installation Of Additional Pressure Gauges, Distributors, Fittings And Shut-Off Valves. Some Of The Gases Are Explosive, Highly Corrosive And Toxic Gases, Which Require The Gas Lines To Be Made Of Orbitally Welded, Electropolished Stainless Steel. In Addition, The Safety Precautions Corresponding To The Types Of Gas Must Be Fully Taken Into Account In Accordance With The Standards And Usual Installation Procedures. Named Gases Are: Sih4, Geh4, Ph3, B2h6, H2, Ch4, Sf6, Ar, O2, N2, C4f8, Chf3, Cf4, He. Furthermore, The Exhaust Pipes Of Process Systems Are Connected To The In-House Exhaust Air. For This Purpose, 1. Fixed Kf Piping Must Be Made Between The Process Chambers Including Any Turbo Pump And The Corresponding Pumping Stations (Technical Center Below The Gray/White Room) 2. Connections Of The Large Devices To Gas Scrubbers (Provided By The Customer) And 3. Connections Of The Large Devices To The Exhaust Network And The Cooling Water Supply Of The House. Complete Qualification Protocols And Test Documents (Including Necessary Leak Test Measurements, ...) Must Be Included For All Media To Be Installed (Gas, Water, Vacuum Exhaust Gas). In Addition To The Supply Media To Be Installed, Existing Machine-Internal Piping Of A Pecvd System (Gases: Sih4, Geh4, Ph3, B2h6, H2, Ch4, Sf6, Ar, O2) Must Be Qualified According To The Same Criteria. The Assignment Includes Two Hookup Phases. Phase 1 Is Planned For The Period Q4/25 - Q1/26 And Phase 2 Is Planned. Q2/26 - Q4/26.