Tenders Are Invited For Purchase And Delivery Of 2 New Backhoe Loaders For The Needs Of The District Storage And Equipment Base For Civil Protection And Civil Defense.

The Subject Of The Order Is The Purchase And Delivery Of 2 Pieces Of New Backhoe Loaders To The Headquarters Of The Ordering Party: Road And Bridge District No. 3 In Poczesna - Ul. Bociana Górka 19, 42-262 Poczesna For The Needs Of The District Storage And Equipment Base For Civil Protection And Civil Defense By December 15, 2025. Each Of The 2 Purchased Backhoe Loaders Must Be Complete, Free From Physical Defects (Design, Material, Workmanship), Technical And Legal, And Approved For Road Traffic. The Backhoe Loader Must Come From Mass Production, It Is Not Allowed To Offer A Vehicle From Unit Production Or One Whose Parameters Have Been Specially Changed To Meet The Requirements Of This Tender. The Contractor Will Attach To The Offer At Least 4 Color Photos Showing The Offered Equipment From Each Side (Front, Back, Right, Left Side).1. The Delivery Includes (Purchase And Delivery To The Ordering Partys Bases At The Contractors Expense) 2 Pieces Of Backhoe Loaders With The Following Minimum Technical And Operational Parameters: 1.1. General Technical Data• Brand New Machine, Not Older Than 2024• Weight Of The Machine In Ready For Operation Min. 9900 Kg• Four Equal Wheels With A Minimum Diameter Of 28 1.2. Data Of The Backhoe Excavator• Arm With The Ability To Rotate A Minimum Of 180 Degrees With A Telescopic Boom;• Digging Bucket With Teeth: 600 Mm, 300 Mm • Hydraulic Tilting Grading Bucket 1500 Mm • Bi-Directional Line For Feeding The Tilting Grading Bucket• Mechanical Quick Connector On Excavator Arm • Vertically Extendable Supports; • Control Of The Excavator Arm Using Joysticks; • Reach At Ground Level Measured From The Rear Rotation Axis Min: 6900 Mm • Minimum Digging Depth Min: 5800 Mm1.3. Loader Data• 6 In 1 Bucket, Universal Opening With Screwed Teeth;• Bucket Volume: 1.15 M3• Loading Forks Mounted On The Bucket;• Bucket Self-Leveling System;• Arm Amortization System;• Controlling The Loader Arm With A Multifunction Joystick 1.4. Engine Specifications• Diesel Engine, 4-Stroke, Liquid-Cooled, Turbocharged;• Maximum Power: Min. 120 Hp; • Engine Meeting The Latest Eu Stage V Exhaust Emission Standard • Engine Capacity Min. 3600 Cm3 Max. 4000Cc31.5. Gearbox Specifications• Automatic Gearbox, Min. 4 Forward Gears And 3 Reverse Gears• Four-Wheel Drive With The Possibility Of Switching To Two;• Swinging Front Axle;• Axles With Limited Slip Differential.1.6. Hydraulic System Specifications• Closed Type System• Multi-Piston Pump O Variable Flow;• Possibility To Select The Operating Mode - Economical Or Under Heavy Load;• Operating Pressure Max. 210 Bar• Minimum Pump Capacity Min. 160 L/Min;1.7. Specification Of The Electrical System• Electrical System Easily Accessible And Protected;• Tightly Closed And Waterproof Connections;• Meets The Requirements Of The Strictest International Safety Regulations;• Voltage 12 V;• Degree Of Protection Against Moisture Min. Ip67.1.8. Cab Description• Rops And Fops Certified Cab With A Design Ensuring The Best Vis