Bids Are Invited For Electronic Auction For Price Registration For The Acquisition Of Equipment (Hydraulic Pumps, Submerged Pumps, Motor Pumps, Motors, Inverters And Hydraulic Parts) In Order To Meet The Operational Needs Of The Secretariat Of Water And Basic Sanitation (Sasan).

Three-Phase Electric Motor Power: 150 Hp | Number Of Poles: 4 | Frequency: 60 Hz | Nominal Voltage: 380 (V) | Nominal Current: 203 (A) | Yield Index: Ir3 | Efficiency/Efficiency (100% Load) At Minimum: 95.8 | Minimum Degree Of Protection: Ip 55 | Housing Material: Cast Iron Or Higher., Three-Phase Electric Motor Power: 100 Hp | Number Of Poles: 4 | Frequency: 60 Hz | Nominal Voltage: 380 (V) | Nominal Current: 142 (A) | Yield Index: Ir3 | Efficiency/Efficiency (100% Load) At Minimum: 95.4 | Minimum Degree Of Protection: Ip 55 | Housing Material: Cast Iron Or Higher., Three-Phase Electric Motor Power: 75 Hp | Number Of Poles: 4 | Frequency: 60 Hz | Nominal Voltage: 380 (V) | Nominal Current: 104 (A) | Yield Index: Ir3 | Efficiency/Efficiency (100% Load) At Minimum: 95, Centrifugal Pump For Pumping Drinking Water | Horizontal Suction And Vertical Pressure | Single Stage | Nominal Diameter Of The Suppression Flange: 150 Mm | Nominal Rotor Diameter: 400 Mm | Minimum Flow Of 500 M³/H With A Head Of 80 M.C.A | Clockwise Rotation Direction | Spiral, Horizontal, Cast Body In One Piece, With Its Own Feet And With Wear Ring On The Suction Side | Single Suction Closed Radial Type Rotor, With Wear Ring On The Discharge Side | Shaft With Protective Sleeve In The Sealing Region; Shaft Seal With Gasket In Mechanical Seal | Spiral Body And Rotor Material: A48 And Cl30 | Charcoal/Ceramic Mechanical Seal | Sae1045 Steel Shaft, Centrifugal Pump For Pumping Drinking Water | Horizontal Suction And Vertical Pressure | Single Stage | Nominal Diameter Of The Suppression Flange: 150 Mm | Nominal Suction Flange Diameter: 125 Mm | Drilling The Flanges With 08 Holes | Note: Maximum Horizontal Length (Shaft To Flange) Of Coupling Equipment: 675 Mm | Minimum Flow Of 31.0 M³/H With A Head Of 75 M.C.A | Power 125.0 Hp | 60 Hz Frequency | 1750 Rpm Rotation Speed ​​| 380Mm Rotor Diameter | Feet With Holes For Fixing To Base., 10/22/2025, Centrifugal Pump For Pumping Drinking Water | Horizontal Suction And Vertical Pressure | Single Stage | Nominal Diameter Of The Suppression Flange: 150 Mm | Nominal Rotor Diameter: 315 Mm | Minimum Flow Of 450 M³/H With A Head Of 50 M.C.A | Clockwise Rotation Direction | Spiral Body, With Wear Ring On The Upstream Side | Shaft With Protective Sleeve In The Sealing Region; Shaft Seal With Gasket In Mechanical Seal | Spiral Body And Rotor Material: A48 And Cl30 | Charcoal/Ceramic Mechanical Seal | Sae1045 Steel Shaft, Monobloc Pump | Power: 30.0 Hp | Motor With: Number Of Poles: 2 | Frequency: 60 Hz | Nominal Voltage: 380 (V) Three-Phase | Nominal Current: 42.1 (A) | Yield Index: Ir3 | Efficiency/Efficiency (100% Load) At Minimum: 92.4 | Minimum Degree Of Protection: Ip 55 | Housing Material: Cast Iron Or Higher | Flanged Monoblock According To Ansi B16.1 | Snail, Rotor, Pressure Cover, Intermediate And Gg-25 Cast Iron Bearing | Gg-15 Cast Iron Wear Rings And Bearing Cover | Mechanical Seal Consisting Of Aisi-304 Or Higher Stainless Steel, Buna N, Graphite And Ceramic | Back Pull-Out System For Removing The Pump Assembly From The Snail | Aisi-304 Stainless Steel Mechanical Seal Bushing Or Higher | Operating Point: Minimum Flow Of 148.0 M³/H With Head Of 40 M.C.A | Nozzle Diameter: Pressure 21/2 Inches; Suction 4 Po