Request For Quotation Oils And Lubricants

Oil Tad-17 Gost 23652-79. Kinematic Viscosity Mm2/S At 50 Degrees Celsius - 110-120, At 100 Degrees Celsius Not Less Than 17.5. Viscosity Index Is Not Less Than 100. The Temperature Celsius Is Not Higher Than -28 Degrees. Mass Fraction % No More Than: No Mechanical Impurities, Phosphorus - 0.1%, Sulfur - 1.9-2.3%. Density At 20 Degrees Is Not More Than 907 Kg/M3., Antifreeze - Coolant Concentrate Based On Ethylene Glycol For Use In Internal Combustion Engines. Dilution With Water Above 70% Is Not Recommended, Since Due To The Low Concentration Of Additives, Effective Corrosion Protection Is Not Achieved. Available In 1 Kg, 5 Kg, 10 Kg Canisters, And 220 Kg Barrels. Antifreeze 40 - Coolant With An Antifreeze Temperature Of -40°C, A Solution Of Concentrate And Water In A Ratio Of 50%:50% By Volume. Available In 1 Kg, 5 Kg, 10 Kg Canisters, And 220 Kg Barrels. Antifreeze Arctic - Coolant With A High Content Of Anti-Cavitation Additives, With A Freeze Protection Temperature Of -55°C, A Solution Of Concentrate And Water In A Ratio Of 60%:40% By Volume. Available In 1 Kg, 5 Kg, 10 Kg Canisters, And 220 Kg Barrels. Frost Protection Temperature -40°C -65°C; Color - Red; Density At 20°C, G/Cm3 – 1.120; Boiling Point, °C -172; Concentrate Solution 50% Vol -108; Alkalinity Reserve, Ml Hcl - 6.0; Ph, 50% Vol. - 10.0; Foaming Capacity: Volume, Ml – 65; Settling Time, Sec – 2; Crystallization Temperature, °C, 50% Vol. – 38; Water Content, %, Multi-Purpose Lubricant Based On Synthetic Base Oil And Lithium Complex Soap With An Extreme Pressure Additive Package (Ep Additives) Lx Ep 2 For Friction Units. Physical And Technical Characteristics: Compliance With The Kphc 2 N-50 Standard, Method Din 51502, Nlgi Class - 2, Penetration With Stirring, 60 Double Strokes, 10-1Mm Gost 5346 (Method B) 265-295. Operating Temperature Range From -50 To +250 Degrees Celsius. Grease Color Is Blue, Structure Is Homogeneous Ointment, Thickener Type Is Lithium Complex Soap, Base Oil Is Synthetic, Dropping Point (Astm D 2265 Method) >250, Mass Fraction Of Water Gost 2477% Traces, Withstands Corrosive Effects On Metals Gost 9.080. Welding Load On A 4-Ball Machine (Рс) Gost 9490 2800 N, Wear Scar Diameter At 392 N 60 Min -0.6 Mm. Water Washability, Weight Loss At 79 Degrees Celsius (Astm D 1264) <5%. Mass Fraction Of Mechanical Impurities Gost 6479 - Absent. Container Factory Sealed Barrel 18 Kg, Blue. A Certificate Of Conformity Is Required For The Product., Diesel Engine Fluid Scr Nor Blue Aus 30, Produced In Accordance With The Iso 22241 Euro-6 Standard, Consists Of A Solution Of Water And Urea: Demineralized Water - 67.5% Solution; Urea – 32.5% Solution. Required Documentation: 1) Passport And Instruction Manual; 2) Certificates Of Conformity., Kerosene Is A Pure Flammable Mixture Of Liquid Hydrocarbons (From C8 To C15) With A Boiling Point From +150 To +250 °C, Transparent, Colorless (Or Slightly Yellowish), Slightly Oily To The Touch, Obtained By Direct Distillation Or Rectification Of Oil. Density 0.78-0.85 G/Cm³ (At +20 °C), Viscosity 1.2-4.5 Mm²/S (At +20 °C), Flash Point +28...+72 °C, Auto-Ignition Temperature 200-400 °C (Depending On Medium Pressure), Calorific Value About 43 Mj/Kg., Technical Characteristics Transmission Oil Dexron (Dextron) Dexron Ii D Is A Red Transmission Oil For Automatic Transmissions. Satisfies The Following Requirements: – Excellent Oxidation Resistance – Excellent Anti-Wear Characteristics – Premium Flow Properties At Low Temperatures – Wide Temperature Range – Not Aggressive To Any Type Of Seals Technical Characteristics Dexron Gear Oil Dexron Ii D Is A Red Gear Oil For Automatic Transmissions. Satisfies The Following Requirements: – Excellent Oxidation Resistance – Excellent Anti-Wear Characteristics – Premium Flow Properties At Low Temperatures – Wide Temperature Range – Not Aggressive To Any Types Of Seals Appearance: Red; Viscosity/40°C - 36 Mm²/S According To Astm D 7042; Viscosity/100°С - 7.6 Mm²/7.6Astm According To Standard D 7042; Viscosity Index 185 According To Astm D 2270; Density/15°C - 870 Kg/M3 According To Din En Iso 12185 Standard; Pour Point ≤-36 °C According To Din Iso 3016; Flash Point ≥200°C According To Din Iso 2592 Standard., Technical Characteristics Of The Quality Of Motor Oil For Diesel Equipment Brand: M10g2k Compliance With The Requirements: 1) Degree Of Purity, Mg Per 100 Tons Of Mass Not More Than 450 2) Base Number, Mg Per Koh Per 1 G. Mass Not Less Than 8.0 3) Sulfate Ash Content Not More Than 1.15% 4) Viscosity Index Gost 25371 Not Less Than 0.5 5) Mass Fraction Of Mechanical Impurities 0.015% 6) Self-Ignition Temperature Not Less Than 0.5 7) Content Of Selective Solvents 0.5% 8) Density At 20°C G/M3 Gost 3900 No More Than 0.900 9) Pour Point °C Not Higher Than Minus - 18°C 10) Mass Fraction Of Water % Mass Absent. Delivery Will Be Carried Out According To Schedule: Until November 10 - 1500 Liters; Until December 20 - 1500 Liters; Total - 3000 Liters. (Packaged In 5 Liters)