1. The Subject Of The Order Is The Purchase Of A Self-Propelled Backhoe Loader With A Wheeled Chassis, Free From Defects, Brand New, Intended For Road/Construction/Earthworks.2. General Requirements For The Machine:• A Brand New Machine, Manufactured In 2025, From Series Production, Not Being A Prototype Or The First Machine In A Given Series;• The Machine Must Meet Eu Standards;• The Machine Equipped With A Telemetric System Monitoring The Machines Operation;• Exhaust Emission Standard Consistent With The Regulatory Requirements Applicable On The Date Of Delivery And Allowing The Machine To Be Allowed To Travel On Roads Public, • Noise Level In The Machine Not Exceeding 75 Db. 3. Technical And Operational Requirements For The Machine: 3.1. Engine And Electrical System.• Minimum Engine Power - 74 Hp,• Engine Equipped With Dpf, Without Adblue,• Min. Torque. 440 Nm At 1200 Rpm, • Turbocharging, • 12V Voltage, • 150A Alternator, • Electrical Cables Meeting The Requirements Of The Ip69 Standard. 3.2. Gearbox And Chassis. • Gearbox With Autoshift, • Min. 6 Forward And 4 Reverse Gears, • Selection Of Driving Direction Using An Electric Switch In The Steering Column Or Using A Switch In The Joystick, • Driving Speed Min. 40 Km/H,• Front Steering Axle,• Hydraulically Assisted Steering System (Hydrostatically), Possibility Of Emergency Machine Control,• Axles Equipped With Final Drives With A Planetary Gear With Proportional Torque Distribution,• Possibility Of Limiting The Slip Of The Differential System,• Torque Converter Lock,• Function Of Automatic Switching Of The Drive From 4Wd To 2Wd, • Power Brakes With Full Brake Release System, • Front And Rear Wheels With General Purpose Tires, Min. – Front 20, Rear 26.3.3. Hydraulic System.• Multi-Piston Pump,• Oil Flow Min. 160 L/Min., • Working Pressure Min. 250 Bar, • Possibility Of Disconnecting The Hydraulic Drive Of The Drive System And Directing All Power To The Work Control System, • Automatic Setting Of The Bucket In The Digging Position And Self-Leveling Of The Front Bucket.3.4. Parameters Of The Loader Arm.• Control Of The Loader Arm Using Joysticks,• Multifunctional Bucket With Forks, 6In1 Type, With A Capacity Of Min. 1.0 M3 And Width Min. 2.3M, • Loading Height Min. 3.0 M, • Unloading Height Min. 2.5 M, • Reach At Full Height Min. 1.3 M, • Load Lifted To Full Height Min. 3,000 Kg, • Bucket Cutting Force Min. 6,500 Kg, • Breaking Force On The Bucket Arms Min. 4,700 Kg,• Fork Spacing Between 0.2 M And 2.20 M,• Lifting Height On The Forks Min. 2.90 M.3.5. Parameters Of The Excavator Arm.• Control Of The Excavator Arm Using Joysticks,• Mechanical Excavator Quick Coupler,• Bucket With A Width Of 400 Mm, 600 Mm,• Tilting Slope Bucket With Two Cylinders, 1,500 Mm Wide,• Digging Depth Min. 5.90 M, • Range At Ground Level From The Arm Rotation Axis Min. 6.50 M, • Reach At Ground Level Sideways From The Machine Axis Min. 7.00 M, • Loading Height Min. 4.70 M, • Lifting Capacity With Extension Min. 700 Kg, •
