The Subject Of The Order Is The Purchase And Delivery Of A Brand New Backhoe Loader With A Wheeled Chassis Along With Loader And Backhoe Accessories. The Equipment Must Be Complete, Brand New, Free From Physical Defects (Including Construction, Material, Workmanship, Technical) And Legal Defects, Meeting The Following Requirements. Characteristics And Technical Parameters Of The Machine: Drive System: - Diesel Engine With A Capacity Of 3.5 To 4.0 Liters Meeting Eu Stage V Standards, - Maximum Power Of At Least 82 Kw, - Fully Automatic Gearbox, - Minimum 6 Forward And 3 Reverse Gears, - Rear Axle Lock, - 4-Wheel Drive, - Both Axles Torsional, 28-Inch Tires Suitable For Driving On Public Roads, Additional Metal Cover Of The Drive Shaft. Hydraulics: - Multi-Piston Pump With Variable Displacement, - Maximum Flow Of At Least 160 L/Min, - Maximum Pressure Of At Least 250 Bar. Excavator Arm: Telescopic Extension, Curved Boom, Boom And Rotation Transport Lock, Joystick Control, Button To Change The Control System, Maximum Digging Depth Of Minimum 6100 Mm, Excavator Buckets Mounted On A Mechanical Excavator Quick Coupler With A Width (20 Mm Tolerance): 305 Mm And 610 Mm Z Teeth, - Hydraulic Slope Bucket With A Width Of 1500-1600 Mm With A Hydraulic Line, - Excavator Arm Of Variable Length, Hydraulically Extendable (Telescopic), - Bucket Arm Rotation Angle Min. 180O, - Lifting Capacity With The Folded Arm (Without Telescopic Extension) - Minimum 1500 Kg. Loader Arm: - Parallel Lifting System, - Control With One Joystick, - Drive Disconnect Button On The Joystick, - Travel Direction Selected From The Joystick Without Taking Your Hand Off, - Return To Digging Function, - Arm Amortization System Over Time Driving, Multi-Function Bucket With A Capacity Of At Least 1.2 M3, Maximum Height Of The Bucket Joint Pin At Least 3500 Mm, Hydraulic Quick Coupler, Forks And Fork Frame As Separate Accessories. Cabin: Rops/Fops Certified, Heating And Ventilation, Air Conditioning, Doors On Both Sides, Closed Storage Compartment, Tiltable Steering Column, Pneumatically Suspended And Heated Seat, 2 Exterior Mirrors, Possibility Of Simultaneous Operation Of Both Arms Of The Machine, Radio With Bluetooth. Other Requirements: - Main Components Of The Machine (Frame, Engine, Gearbox, Bridges, Hydraulics) Made By The Same Manufacturer, - Min. 8 Led Work Lights, Road Lighting (Rear Lamps With Metal Covers), Rubber Stabilizer Pads, Front And Rear Mudguards, Brand New Machine, Min. 2025, From Mass Production (Not A Prototype), Approved For Road Traffic, The Distributor Is An Authorized Representative Of The Brand And Has A Stationary And Mobile Service In Poland. Additional Requirements: • The Contractor Should Be The Manufacturer Or An Authorized Representative Of The Manufacturer Of The Offered Backhoe Loader. • The Offered Equipment (Brand) Has An Authorized Service In Poland Stationary And Mobile - Warranty Service On The Or
