Type: Hydraulic Excavator, Latest Series, New, Zero Hour, Registered With Renagro, Manufactured In The Second Half Of 2024 Or Higher, Net Effective Power (Maximum In Hp) Minimum Of 110 Hp, Diesel Engine That Meets Pollutant Control (Conama, Proconve, Mar I, Tier Ii), Hydrostatic Transmission, Bar Traction Force 15,800 Kgf/M, Speed Number 2 (Two) Ahead And 2 (Two) Aft; Hydraulic System Piston Pump Variable Flow, Bucket Capacity Minimum 0.80 M³, Bucket Breakout Force Of Minimum 11,000 Kgf, Arm Breakout Force Of Minimum 9,100 Kgf, Minimum Rotation Speed Of 11 Rpm, Digging Depth Of 6,000 Mm Conveyor With Shoes Minimum Width 600 Mm, Minimum Number Of Upper Rollers Of 2 (Two) And Minimum Lower Rollers Of 7 (Seven) On Each Side, Operating Weight From 17,000 Kg To 18,500 Kg, Minimum Track Shoes Width 600Mm, 24 V Electrical System, Hydrostatic Steering, Closed Cab With Air Conditioning And Rops/Fops Certification, The Contractor Being Responsible For All Expenses, Damages And Or Damages To The Good Until Effective Delivery At The Headquarters Of Each Municipality Participating In The Program(S), To Be Received By A Municipal Employee Responsible For Receiving Training: Yes, Technical Delivery And Training To Be Carried Out By The Supplier, With Provision Of A Certificate, Specific Sticker For Each Program For The Purposes Of Warranty And Technical Assistance, The Proponent Must Prove That They Are Authorized By The Manufacturer To Operate In The State Of Paraná And Have Their Own Workshop, Technical Personnel And Adequate Tooling, High-Turnover Stock Of Original Parts Of The Proposed Brand (Outsourcing Prohibited), Located At A Maximum Distance Of 180 Km From The Bidding Municipality; Submit A Declaration From The Manufacturer Alongside The Proposal, Proving That It Is Authorized Technical Assistance;, Type: Motor Grader, Net Effective Power (Maximum In Hp) Minimum 140 Hp, Mar Iii), Operating Weight From 14,000 Kg To 17,550 Kg, Gear Number 6 (Six) Forward And 3 (Three) Reverse; Torque Converter Coupling System Or Direct Transmission, Powershift Type Transmission, Hydraulic System Variable Flow Piston Type Pump Or Gear Pump, Blade With Minimum Width/Height Of 3,650 Mm/610Mm, Hydraulic Blade Tipping And Displacement, Right/Left Lateral Displacement Of 700/700 Mm, Minimum Turning Radius Of 7,200 Mm, Maneuverability Articulated, 360º Turning Radius, Maximum Slope Angle Of 90º, Rear Ripper With 05 (Five) Large Teeth, Rear And Front Tires 14X24 G2/L2 Closed Cabin With Factory Air Conditioning And Rops/Fops Certification, Factory Satellite Tracker, To Be Received By Municipal Employee Responsible For Receiving: Training: Yes, With Provision Of Certificate. Specific Sticker For Each Program For Warranty And Technical Assistance Purposes, High-Turnover Stock Of Original Parts Of The Proposed Brand (Outsourcing Prohibited), Type: Wheel Loader, Net Effective Power (Maximum In Hp) Minimum Of 130 Hp, Mar I) Operating Weight From 11,500 Kg To 13,000 Kg, Gear Number 4 (Four) Forward And 3 (Three) Aft; Torque Converter Coupling System, Powershift Or Hydrostatic Type Transmission, Hydraulic System Gear Pump Or Variable Flow Piston, Minimum Articulation Angle 38º For Each Side, Minimum Bucket Capacity 1.70 M³, Straight Shear Load 9,890 Kgf Angled 8,900 Kgf And Edge Cutting, With De
