Bids Are Invited For Acquisition Of A 6X4 Dump Truck And Heavy Machinery (Wheel Loader, Vibratory Compactor Roller And Motor Grader) In Response To The Demand Of The Department Of Agriculture, Through Agreement No. 320/2025 - Seab.

6X4 Dump Bucket Truck - Minimum Power Of 280 Hp; Diesel Engine, Compliance With Conama Resolution 490/2018, (Proconve P8, Equivalent To Euro Vi) Manual, Automatic Or Automated Transmission Of At Least 9 (Nine) Gears/Speed ​​Forward And 1 (One) Reverse, White Color (Truck And Bucket), General Characteristics: New; Zero Km Driven; Year Of Manufacture In Current, On The Date Of Receipt Of The Purchase Order Or Model Year Higher), Minimum Bucket Capacity Of 10.0M³, High Strength Structural Steel As Sae 1020 – Astm A- 36 Or Sac-350, Indirect Drive Hydraulic System With 2 (Two) Pistons, Warranty Of At Least 12 (Twelve) Months (Truck And Bucket), All Revisions For The Same Period, With Inputs, Logistics And Manual Labor Work At The Expense Of The Contractor With No Mileage Limit; Delivery: The Contractor Will Deliver With A Full Tank; Licensed And Registered, As Well As Being Responsible For All Expenses For Damages And/Or Malfunctions Of The Item Until Effective Delivery At The Headquarters Of Each Municipality Participating In The Program(S) To Be Received By The Municipal Employee Responsible For Receipt. Tires: Minimum 295/80 R22.5 Mixed Use. Capacity: Total Gross Weight (Pbt) Approved Of 23,000 Kg, Sticker(S) Of The Program(S)., Motor Grader - Latest Series, New, Zero Hour, Admissible Manufacture Second Half Of 2024 Or Higher, Net Effective Power (Maximum In Hp) Minimum Of 200 To 220 Hp, Diesel Engine That Meets The Control Pollutants (Conama, Proconve, Mar Iii), Weight Minimum Operating From 16,000 Kg To 17,550 Kg, Gear Number 6 (Six) Forward And 3 (Three) Reverse; Torque Converter Coupling System Or Direct Transmission, Powershift Type Transmission, Hydraulic System Piston Type Pump Variable Flow, Blade With Minimum Width/Height 3,650 Mm/610Mm, Hydraulic Tipping And Blade Displacement, 24 V Electrical System, Minimum Turning Radius Of 7,200 Mm, Hydrostatic Steering, Articulated Maneuverability, Turning Radius 360º, Maximum Slope Angle Of 90º, Rear Ripper With 05 (Five) Large Teeth, 14X24 G2/L2 Rear And Front Tires Closed Cab With Factory Air Conditioning And Rops/Fops Certification. Original Manufacturer Satellite Tracker, With Fault Code Reading. Warranty Of At Least 12 (Twelve) Months, And All Preventive Maintenance Reviews, Logistics And Supplies, At The Expense Of The Contractor During The Warranty Period Or 2,000 Hours, Delivery: Full Tank, Minimum Capacity Of 280 Liters, With The Contractor Being Responsible For All Expenses, For Damages And Or Breakdowns Of The Good Up To Effective Delivery To The Headquarters Of Each Municipality Participating In The Program(S), To Be Received By The Municipal Employee Responsible For Receiving. Training: Yes, Technical Delivery And Training To Be Carried Out By The Supplier, With Provision Of Certificate. Specific Sticker For Each Program., Wheel Loader - Latest Series, Net Effective Power (Maximum In Hp) Minimum Of 180 Hp, Mar I) Operating Weight Of At Least 15,000Kg, Gear Number 4 (Four) Forward And 3 (Three) For Reverse; Torque Converter Coupling System, Powershift Or Hydrostatic Type Transmission, Hydraulic System, Variable Flow Gear Or Piston Type Pump, Minimum Articulation Angle 38º For Each Side, Minimum Bucket Capacity 1.70 M³ And Cutting Edge, With Teeth And Bolted Segment, With 2 (Two) Lifting Cylinders And 1 (One) Tumbling Cylinder, Strength Breakdown In The Bucket, Minimum 9,800 Kgf, Operational Load