Wax, In A Package Of At Least 0.5 Kg. Designed For Modeling The Bases Of Removable Dentures, Making Bite Templates, Molding Individual Impression Trays, Base Trays, As Well As Their Parts. Composition And Main Properties: Translucent Wax Plates Without Internal Stress In A Softened State Are Easily Connected To Each Other Without Sticking To The Fingers. The Wax Is Easily Formed When Heated And Processed At Room Temperature With A Sharp Tool. After Gentle Heating Over A Flame, The Wax Plates Have A Smooth Surface. When Making A Prosthesis, Wax Is Easily Removed From Plaster Molds With Boiling Water Without Any Residue, Does Not Leave Marks On Porcelain And Plastic Teeth And Does Not Stain The Plastic Of The Prosthesis. Wax Has Negligible Thermal Linear Expansion. Basic Wax Belovax Does Not Cause Irritation To Oral Tissues., The “Dp-2T” Product Is A Tablet Form Of The Dp-2T Product. Available In The Form Of White Tablets Weighing 0.5; 1.0; 5.0 And 10.0 G. Contains Trichloroisocyanuric Acid (Tcca) As An Active Ingredient. The Content Of Active Chlorine Per 100 G Is Not Less Than 32%. The Amount Of Active Chlorine In Tablets Weighing 0.5 G Is 0.16 G, Weighing 1 G - 0.32 G, Weighing 5 G - 1.6 G And Weighing 10 G - 3.2 G, The Reusable Syringe For Washing Janet (Volume 150 Ml) Is Intended For Effective Washing Of Body Cavities, For Intraperitoneal Infusions, As Well As For Introducing Significant Volumes Of Liquid Medications Into The Body. The Janet 150 Ml Reusable Syringe In Its Design Has A Silicone Ring On The Piston For Better Sealing. The Metal Parts Of The Janet Syringe Are Made Of Stainless Steel And Brass; Piston Rings And Sealing Rings Made Of Rubber Compound Or Silicone., // Bleached Cotton Medical Gauze In Rolls 1000Mx90cm. Non-Sterile, Hygroscopic, Width 90+-1.5 Cm, With Linen Weave And Surface Density Of At Least 36 G/M². The Permissible Deviation In Surface Density Must Be No Less Than Minus 5%, The Number Of Threads Per 10 Cm For The Warp Is 121-2, For The Weft 71-2. The Breaking Load Of A Strip Of Fabric Measuring 50*200 Mm, N (Kgf), Must Be No Less Than: For The Warp 78 (8.0) For The Weft 34 (3.5). Linear Density Of Yarn, Texture: At Least 20.0 For Warp, 20.0 For Weft. Wetability No More Than 10 Sec (Gost 9412-93) The Gauze Should Be Made From Cotton Yarn. The Gauze Should Be Rolled Into Rolls In A Sleeve The Full Width Exactly Without Distortions And Drooping Edges, Supplied In Rolls In Bushing 1000 Meters. The Presence Of Defects In The Roll Is Not Allowed 1St And 2Nd Groups. The Gauze Must Be Resistant To Steam Sterilization Method. .Mandatory Provision Of 1 Meter Of Sample For Quality Control.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
