Tenders Are Invited For Construction Of A Washing Facility For Agricultural Equipment For Work On The Care Of Forest Crops

The Subject Of The Order Is The Construction Of A Washing Station For Equipment Used For Forest Management Purposes, Facility: Category Viii. The Designed Single-Station Manual Car Wash Consists Of A Reinforced Concrete Ramp Slab With A Drainage Well Covered With A Grate. In Order To Retain Suspension From Rainwater Or Process Sewage Flowing By Gravity, A Separator Is Designed With A Built-In Settling Tank. The Built-In Settling Tank Reduces The Suspension Content In Pre-Treated Sewage, Protects The Separator Against Rapid Silting And Improves Its Operating Conditions. Water Flowing From The Slab To The Catchment Well Will Flow Through A Ø 110 Pvc Sewage Pipe To The 2.0 M³ Sand Settling Tank Built In The Separator Through A Previously Built-In Typical Dn 315 Mm Pvc Well. Then, The Sewage Cleared Of Sand Will Be Transferred To The Separator Chamber, Which Has A Built-In Coalescing Insert To Separate Oil-Derived Contaminants. After Separating These Substances, The Treated Sewage Will Be Discharged To A Sloping Concrete Tank With A Capacity Of 10 M3. The Petroleum Substances Generated In The Separator And The Sand From The Sedimentation Tank Will Be Transported For Disposal By A Specialist Company That Has Valid Permits For The Disposal Of Petroleum Substances. A Washer With A Pressure Hose For Washing Machines Will Be Portable. Water To The Washer Will Be Connected With A Pressure Hose From The Intake Valve, Which Is Located On The Wall Of The Boiler Room Building, 15 M Away From The Planned Car Wash. After Washing The Equipment, The Hose Will Be Rolled Up And Stored In The Utility Room Together With The Pressure Washer. The Washer Is Powered By Electricity From A Socket Located In The Farm Building Next To The Designed Car Wash. The Area Around The Slab Will Be Paved With Concrete Cubes.