Bids Are Invited For Acquisition Of Laundry Equipment For The Municipal Hospital Irmã Dulce, To Meet The Demand Of The Municipal Secretariat For Public Health Management And Basic Sanitation Of The Municipality Of Monte Negro/Ro.

Clothes Spinner - Tripod With Capacity For 30 Kg Per Load. Designed To Remove Excess Water From Clothes. For Professional Use, As Per Features Below: Control Via Direct Start Key With On/Off Button. Tripods And Base Of The Internal Basket Made Of Sae1020 Steel, External Body Made Of Sae1020 Steel With Anti-Oxidant Base Paint And Final Finish In Epoxy Paint; Body Suspended By Chain Links, For Better Vibration Absorption. Inner Basket And Outer Lid Made Of Aisi 304 Stainless Steel; Alloy Steel Shaft Properly Dimensioned To Withstand The Efforts And Possible Overloads Requested During Operation, Drive The Basket Through A Three-Phase Induction Electric Motor, By Means Of Friction Pulleys And V Belts To Allow A Smooth And Safe Start. Control Panel Located Next To The Equipment Equipped With A Manual Start Key; Brake Through Pedal, With Pressure Distributed Through A Drum Covered With Brake Lining, Providing A Smooth And Safe Stop. Starter Key And Brake Pedal; It Must Comply With Regulatory Standard Nr12 Of The Ministry Of Labor, Which Requires Items Aimed At Greater Operator Safety, Such As: Fairings And/Or Protections That Prevent Access To The Moving Parts Of The Centrifuge, Such As Gears, Belts, Pulleys, And Motors; Equipped With A Security System With An Electric Lock On The Lid With A Safety Relay, Combined With Basket Movement Control Devices Q..., Rotating Clothes Dryer Capacity 30 Kg Electric Heating: Electric Dryer With A Capacity Above 30 Kg. Minimum Load Factor Of 1:25. Structure Must Be Built In Sae 1020 Steel Rigidly Interconnected By Continuous Welding, Providing Total Stability To The Assembly; External Body Built In Sae 1020 Steel Plates, Cabinet Type, Coated With Double Wall For Thermal Insulation And Drying Efficiency; Internal Basket Must Be Made Of Stainless Steel Sheet With Perforations That Provide At Least 45% Of Area For Hot Air Circulation, Shaft In Sae 1020. External Door Made Of Sae 1020 Steel, Heat Resistant, With A Large Window To Allow Viewing Of The Clothes In Motion; Transmission System Using Pulleys And V Belts, Using A Double-Shaft Electric Motor To Rotate The Basket And 1 Hp Exhaust Fan, Equipped With Thermal Protection Against Overloads. Heating System Through Shielded Tubular Electric Resistances Alerted For Better Heat Dissipation. Exhaust Fan With Cast Aluminum Rotor To Remove Saturated Air From Inside The Basket, With Filter To Retain Fluff; The Drying Of The Clothes Must Be Processed By Exhausting The Humid Air, Which Is Previously Subjected To A Heating System Through A Set Of Resistances, Passing Through The Internal Cylinder, And Then Being Led To The Outside By Going Through A Fluff Retention Treatment In An Easy-To-Clean Waste Collector Filter..., Clothes Transport Car - Structure Material: Stainless Steel. Protection Type: Rubber Wrap Bumper. Quantity Swivel Wheels: 4 Castors 5. Length: 115 Cm, Width: 60 Cm, Height: 90 Cm. Additional Features: 2 Doors, 3 Shelves, Carrying Handle. Type: Clean Clothes, Steel Closet - Steel Closet Material: 22 Steel Plate, Surface Finish: Painted, Color: Gray, Number Of Doors: 2 Units, Number Of Shelves: 04 Units, Height: 198 Centimeter, Width: 104 Centimeter