Tenders Are Invited For Modernization Of The Water Supply Network In The Gidle Commune In Terms Of Connecting The Water Supply Network

3.1. The Subject Of The Order Is The Implementation Of An Investment Called Modernization Of The Water Supply Network In The Gidle Commune In Terms Of Connecting The Water Supply Network, Under Which The Contractor Is Obliged To Perform The Following Two Tasks: 1) Task No. 1 - Expansion Of The Water Supply Network In The Śliwaków Section Of The Commune. Kłomnice – Borowa Commune Gidle, Including Plots No. 32, 33, 190, Borowa District, Commune. Gidle And Plot No. 1068, Śliwaków Commune. Kłomnice.2) Task No. 2 - Expansion Of The Water Supply Network On The Section Pławno - Górki Commune. Gidle, Including Plots No. 34, 184 And 433, Pławno Commune. Gidle. 3.2. Scope Of Works For Task No. 1: 1) Construction Of A Distribution Water Supply Network With Cut-Off And Measuring Fittings With A Total Length Of 738.8 M. 2) Construction Of A Water Supply Network Made Of Pe100 Sdr17 Pipes Pn 10 Dn 125 Mm Intended As A Connection Of Two Existing Sections Of The Water Supply Network. 3) The Water Supply Network In Question Should Be Equipped With Shut-Off Fittings In The Form Of Three Cast Iron Flanged Gate Valves, Diameter 100 Mm. 4) At The Passage Under The Bottom Of The Warta River And In The Floodplains, A 101.4-Meter Section Of The Water Pipeline Is Planned To Be Constructed Using The Controlled Jacking Method With A Pehd Rc Sdr17 Dn 200 Mm Jacking Pipe. In The Remaining Sections, The Water Pipes Were Laid Using The Controlled Jacking Method. Starting And Ending Chambers To Be Constructed In The Form Of An Open, Reinforced Excavation With Ground Drainage Using A Wellpoint System, 5) Installation Of A Water Meter Well Dn 1500 Mm On The Existing Section Of The Water Supply Network In The Road Right-Of-Way Of A Public Road. The Well Will Be Equipped With A Dn 80 Mm Water Meter Set, Including A Coupled Water Meter, An Anti-Contamination Valve, A Mesh Filter, Flanged Stubs, Dn 100/80 Mm Flange Reducers And Gate Valves Installed In The Ground Outside The Well. 6) Restoration And Restoration Of The Areas To Their Original State, Tidying Up The Construction Site. 3.3. Scope Of Works For Task No. 2: 1) Construction Of A Distribution Water Supply Network With Cut-Off And Measuring Fittings With A Total Length Of 450.1 M.2) Construction Of A Water Supply Network Made Of Pe100 Sdr17 Pipes Pn 10 Dn 160 Mm Intended As A Connection Of Existing Sections Of The Water Supply Network.3) The Water Supply Network In Question Should Be Equipped With Two Cut-Off Fittings Cast Iron Flanged Gate Valves Fi 150 Mm.4) At The Passage Under The Bottom Of The Warta River And In The Floodplains, It Is Assumed That An 88-Meter Section Of The Water Pipeline Will Be Constructed Using The Controlled Jacking Method With A Pehd Rc Sdr17 Dn 250 Mm Jacking Pipe. In The Remaining Sections, The Water Pipes Were Laid Using The Controlled Jacking Method. Starting And Ending Chambers To Be Constructed In The Form Of An Open Excavation, Reinforced With Soil Drainage Using A Wellpoint System. 5) Restorat