Tenders Are Invited For Expansion And Retrofitting Of A Selective Municipal Waste Collection Point

The Subject Of The Study Is The Development Project For The Expansion Of The Selective Municipal Waste Collection Point In Kielno, Including The Relocation Of Two Storage Containers, The Construction Of A Social Container, Two Storage Containers, A Truck Scale And The Expansion Of External Electrical Installations, As Well As The Construction Of A Steel Shelter And Two Motorized Sectional Doors. The Following Are Planned In The Investment Area: – Construction Of A Truck Scale With Dimensions Of 8X3m And A Load Capacity Of 60T, Flush With The Ground Level, Based On A Reinforced Concrete Foundation, – Change Of Location (Relocation) Of Two Existing Containers With Dimensions 2.30 X 6.0 M – Construction Of Two New Storage Containers With Dimensions 2.44 X 6.0 M Height 2.9 M – Construction Of A New Social Container With Dimensions 2.44 X 6.0 M, Height 2.9 M, – Removal Of Trees Marked On The Land Development Plan, – Replacement Of Parts And Construction Of New Hardened Asphalt Surfaces, – Construction Of A Steel Shelter Made Of Hot-Rolled Ipe 300 Sections And Closed Profile Sections 10 Cm X 10 Cm. Structure Painted With Epoxy Paint. The Roof Covering And Wall Structures Are Made Of Corrugated Sheet Metal. The Floor Is Made Of 8 Cm Concrete Cubes On A Concrete Base, - Construction Of 2 Sectional Gates With An Electric Drive Along With Electrical And Lighting Installation - Construction Of An External Electrical Installation For The Designed Truck Scales And Containers, And Lighting With Designed Poles, Removal Of One Lighting Pole, Construction Of An External Telecommunications Installation With Monitoring. Shed Parameters: - Area Building Area 94 M² - Area Usable Area: 93.5 M² - Volume: 470 M³ - Technical And Executive Design3. The Contractor Is Obliged To Perform Post-Construction Geodetic Measurement Of The Task; Documentation Stamped With Appropriate Seals Confirming Positive Control By The District Office Should Be Submitted In Writing - 3 Copies And Electronically In (Pdf Or Jpg And A File Opened By The Cartographic Program Mmp Or Dxf). 4. By Presenting Proper Names In The Documentation Describing The Subject Of The Order, The Ordering Party Aimed Only To Clearly Show The Technical Parameters Of The Material (Device). Should Be Used To Perform Construction Works. The Use Of Proper Names Does Not In Any Way Imply The Manufacturer, It Is Only Illustrative. The Contractor Is Obliged To Use Products Of A Manufacturer Of His Choice With The Same (Equivalent) Technical And Quality Parameters. Compliance Of Parameters Should Be Confirmed By A Certificate Issued By A Conformity Assessment Body (Or Other Equivalent Conformity Assessment Bodies) Or A Test Report Carried Out By This Body. Unit As A Means Of Evidence Confirming Compliance With The Requirements Or Features Specified In The Description Of The Subject Of The Contract, Offer Evaluation Criteria Or Contract Performance Conditions. The Ordering Party Also Allows Other Appropriate Means Of Evidence