Tenders Are Invited For Purchase And Delivery Of A New Truck - Hds Tipper With Gvw Up To 12 Tons,

The Subject Of The Order Is The Delivery To The Ordering Party Of A New Truck On A Two-Axle Chassis With A 3-Sided Tipper And Hds Body With A Gvm In The Range Of 8,200 - 12,000 Kg.1. Detailed Description Of The Subject Of The Order: Required Technical Parameters1) Chassis / Running Gear / Drive Dmc (Gvw): In The Range Of 8,200 - 12,000 Kg. Axle Configuration: 4 × 2. Actual Load Capacity (With Superstructure And Hds Without Additional Equipment): ≥ 4,000 Kg. Gearbox: Manual Or Automatic/Amt (E.G. Duonic Or Equivalent).Engine: Diesel, Min. 125 Kw (≈ 173 Hp), Euro 6. Brakes: Disc Front/Rear; Abs (Permitted Assistance Systems: Ebs/Asr/Esp/Engine Brake - If Available). Fuel Tank: ≥ 90 Liters. Installation And Safety Equipment: Reversing Signal Or Reversing Camera (At Least One). Cabin: Day Cab; 3 Places; Air Conditioning; Electrically Operated And Heated Mirrors; Power Windows; Central Locking; Digital Tachograph; Steering Column Adjustment; Drivers Seat With Suspension.2) Bodywork - Three-Way Tippertype: Three-Way Tipper (Rear/Left/Right), Hydraulic Control.Internal Dimensions Of The Box: Length 3700-4200 Mm, Width 2250-2350 Mm; Side Height 500–600 Mm. Sides: Steel; Rear Wall Opens On The Upper And Lower Axis; Front Side 800 Mm Is Allowed. Floor: Wear-Resistant Steel (E.G. Hardox Or Equivalent). Kipper Hydraulics: Drive With Pto; Telescopic Actuator; Tipping Angle ≥ 45°. Equipment: Min. 6 Load Securing Eyes; Tool Box; Side Covers (Anti-Bicycle); Marker Lighting; Preparation For Tarpaulin/Net.3) Crane (Hds) - Behind The Cabin Minimum Requirements:• Working Range Of The Crane (Understood As The Reach Obtained Hydraulically And/Or With Manual Extensions - Me): ≥ 7.5 M.• Net Lifting Capacity (Without Accessories): ≥ 1000 Kg ~4.0 M And ≥ 500 Kg ≥ 7.0 M.• Rotation: ≥ 330°.• Supports: Extendable On Both Sides; Hydraulic Lowering; Manual Or Hydraulic Extension Is Allowed.• Control: From Ground Level On Both Sides; Radio Remote Control – Allowed, Not Required.• Safety: Ce/En 12999; Overload System; Support Position Sensors; Udt – Decision Authorizing Operation; Working Time Counter.• Mandatory Accessories: Hook With Ratchet; • Additional/Optional Equipment: Rotator; Pallet Forks ≥ 2000 Kg; Set Of Quick Couplings/Hoses, Bucket Grapple For Aggregates 0.15–0.25 M³.4) Documents And Approvalshomologation/Coc Of The Complete Vehicle (Or Chassis + Individual Approval In Accordance With The Law).Logbook Of Cranes And Udt Decision For Hds.Pl Operating Instructions (Chassis, Tipper, Hds, Accessories.Weighing Protocol (Curb Weight, Actual Load Capacity) Registration In The Republic Of Poland For The Ordering Party; Third Party Liability Insurance Min. 30 Days.5) Warranty And Serviceminimum Warranty: 24 Months For The Chassis And 24 Months For The Bodywork And Hds (Or 2000 H - If The Manufacturer Applies). Authorized Service For The Chassis And Hds Within A Radius Of ≤ 200 Km From The Ordering Partys Headquarters. Zero Inspection Before Delivery. The Quality Guarantee Pe