Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Furniture For Schools In The Municipal Education Network Of Garanhuns

Flying Drawer – Made From 15Mm Mdf. With 4 Drawers And Key, With 4 Castors, Pvc Handle Material. Approximate Measurements 670X360 (Height And Width). Color To Be Defined By Unit., Accessible Table For Wheelchairs - Accessible Table For People In A Wheelchair – Sides In 50X30 Steel Tube In 16 Plate (1.5Mm). Upper Beam In 30X20 Steel Tube Plate 16 (1.2Mm). Feet In 50X30 Steel Tube In 16 Plate (1.5Mm). Tray For Book Holders In Steel Tube 30X20 Plate 16 (1.2Mm). Injected Book Holder In Gray Color. Closing With Injected Polypropylene Tips And Shoes. All Metallic Parts Will Be Joined Using Mig Welding, With Anti-Rust And Anti-Corrosion Bath, All Metallic Parts Joined Using Mig Welding. Electrostatic Powder Painting With Infrared Curing. Top 900X600mm +/- 10Mm In 18Mm Thick Mdf Or Mdp Covered On The Upper Side In High Pressure Melamine Laminate, Textured Finish In Gray. Edge Ribbons In Blue Color. Rounded Corners., Work Table Without Drawers - Table With 15Mm Mdp Or Mdf Top, Measuring Length 1.20 Two Faces In Low Pressure Melamine Laminate (Bp), Assembled On Side Structure In Rectangular Tube 50X30. Electrostatic Powder Painting In Textured Gray Color., Work Table With Drawers – Table With 15Mm Mdf Top, Drawer With 02 Drawers. Measurements 1.75 (Height). Coated With Low Pressure Melanic Laminate On Both Parts. Fixing The Top To The Structure Using Self-Tapping Screws. Side Structure In 50X30 Carbon Steel With 1.5Mm Plate Finished With Electrostatic Powder Painting, All Pipe Meetings Or Joints Of Metallic Parts Through Mig Welding, With Anticorrosive Treatment. Electrostatic Powder Painting In Textured Gray Color., Executive Swivel Chair With Arm - Medium Back Operational Swivel Chair, With Adjustable Arms And With, At A Minimum, Independent Adjustments And Movements For Seat Height, Back Height, Back Tilt, Double Swivel Casters, 360 Degree Swivel Of The Seat/Back And Height Of Armrests. Backrest: Structured In Anatomical Multilaminated Plywood With A Minimum Thickness Of 10 Mm, Upholstery In Molded Flexible Injected Polyurethane Foam With A Predominant Average Thickness Of 30 Mm, Minimum Backrest Width Of 400 Mm And Minimum Vertical Extension Of 350 Mm. Finishing The Edges Of The Backrest In Extruded Pvc Profile And Covering The Backrest In Fabric Or Synthetic Laminate. Backrest In Synthetic Laminate. Seat: Structured In Anatomical Multi-Laminated Plywood With A Minimum Thickness Of 12 Mm, Upholstery In Flexible Molded Injected Polyurethane Foam With A Minimum Predominant Average Thickness Of 35 Mm With Counter Seat In Synthetic Laminate Or Tnt And Seat Covering In Fabric Or Synthetic Laminate, Profiles And Edge In Extruded Pvc. Attachment Of The Elements To The Seat And Back Chassis Using Screws And Nuts Made Of Zinc-Plated Steel Clamps. Minimum Seat Width Of 450Mm And Minimum Seat Surface Depth Of 410Mm. Mechanism With The Type Of Permanent Contact With The Users Back, Activated Through Two Levers To Adjust The Height Of The Backrest, Tilting The Backrest Through An Internal Rack With At Least 7 Stopping Points And 70 Mm, And Height Of The