Tenders Are Invited For Delivery, Installation And Commissioning Of An Automatic Water Packaging Machine Intended For Packaging Drinking Water

The Subject Of The Order Is The Delivery, Installation And Commissioning Of An Automatic Water Packaging Machine Intended For Packaging Drinking Water, Including Training. Drinking Water And Foil Must Be Constantly Disinfected - With Uv Rays. The Control Must Be Done From The Operator Panel. Adjustment Of Settings (Efficiency And Dose) - Manual Control. It Is Required That The Packing Machine Be Equipped With An Automatic Date Stamp, Enabling The Determination Of The Production Date And/Or Expiry Date Of The Packaged Water, And Enable Packing Water Into Bags With The Ordering Partys Logo. As Part Of The Task Implementation, It Is Necessary To: ▪ Before The Delivery Of The Packing Machine, The Contractor, On Behalf Of The Ordering Party, Obtains A Positive Hygienic Assessment For The Packing Machine And Foil Set Issued By District Sanitary And Epidemiological Station. ▪ Will Deliver 1 Piece Of Water Packaging Machine That Meets The Following Technical Requirements, ▪ Will Connect The Device To The Connections Made: Defect, Electricity Located At A Distance Of No More Than 2 M From The Packaging Machine, ▪ Will Deliver Foil With The Ordering Partys Logo In An Amount Corresponding To At Least 1,000 Pieces Of 1 Liter Bags, ▪ Will Deliver Transport Containers Intended For Packed Water In The Amount Of 10 Pcs. ▪ Will Start The Device, ▪ Conduct Staff Training, Technical Requirements: ▪ Pzh Certificate For Contact With Drinking Water, ▪ Packaged Product: Water Intended For Drinking, ▪ Possibility Of Adjusting The Volume Of Individual Water Bags: 0.2 To 1.0 Liters, ▪ Capacity: Min. 1200 Bags Of 1 L/H, ▪ Width Of Foil On The Roller: Min. 320 Mm ± 10 Mm,▪ Type Of Foil: Single-Layer Foil (Without Sleeve),▪ Water Pressure: 2-3 Bar,▪ Power Requirement: Up To 3 Kw.▪ Water Treatment Line: Connection, Ball Valve, Pressure Reducer, Disinfectant Injector With A Flexible Rubber Tip (Protection Against Limescale Build-Up), Water Filter Incl. Casing Made Of Stainless Steel And A Cotton Insert With A Pore Size Of No More Than 0.5 Μm, A Peristaltic Dosing Pump Connected To A Flow Meter With A Protective Tank Containing A Container With A Disinfectant With A Capacity Of Min. 5L (Chemical Disinfection Of The Packaging Machine Before Starting) Uv Lamp (Flow Min. 2.8 M3/H, Dose Min. 400 J/M2, Connection Min. ¾, Electrical Power Min. 50 W),▪ Foil Disinfection: Uv Lamp,▪ Activities Performed: Packaging Compartment: Unwinding Single-Layer Foil From A Roll, Forming Into A Sleeve, Longitudinal Welding Of The Foil Into A Bagless Sleeve, Dating, Water Dosing, Transverse Welding With Cutting Off, Transport Of The Bag To The Bag Transporter, ▪ Materials And Workmanship: Outer Casing And All Doors Made Of A Material No Worse Than Aisi 304 Stainless Steel And A Thickness Of Not Less Than 1.3 Mm, In Order To Allow Easy Access To Moving Parts, It Is Required That The Compartment Packaging And A Separate Compartment Of The Treatment Line Were Secured By A Door With Glazing, ▪ Bag Transp