Tenders Are Invited For Reconstruction Of The Pedestrian And Bicycle Route As Part Of The Investment Project Entitled: Construction Of The Monastery Forest Nature Trail Along With Accompanying Infrastructure

1. Name Of The Subject Of The Order: The Subject Of The Order Is The Execution Of The Task Entitled: Reconstruction Of The Pedestrian And Bicycle Route As Part Of The Investment Task, Entitled: Construction Of The Nature Trail Monastery Forest With Accompanying Infrastructure, Consisting Of The Construction Of A Nature Path Along With The Construction Of An Engineering Facility - A Pedestrian Footbridge And Land Development With Elements Of Small Architecture In The Form Of Two Gates Welcome Messages. The Investment Is Aimed At Improving The Comfort And Safety Of People Using The Nature Trail. 2. Description Of The Existing Condition. There Are No Buildings In The Investment Area, It Is A Forest Area. The Plots Are Rectangular And Trapezoidal In Shape. The Surface Of Some Of The Plots Covered By The Study Is Flat With A Slight Slope Towards The North. The Highest Elevation Of The Terrain Is Approximately 188 M Above Sea Level. (In Part South). The Investment Area Includes High Greenery In The Form Of Coniferous And Deciduous Stands. The Owner Of Plots 6303 And 6306 Is Pgllp Leżajsk Forest District. 3. The Scope Of Construction Works Includes: A) Construction Of A Nature Path By Hardening It. Characteristic Technical Parameters: - Axial Length Of The Path - 1940.0 M - Width Of The Path - 2.3 M - Area Paths - 4462.0 M2 It Is Planned To Build A Dirt Path By Hardening The Surface With Aggregate. The Works Should Start With Geodetic Marking Out In The Field, Then Trenching In The Native Soil With The Removal Of The Topsoil Layer. You Should Also Clear Out Any Stumps And Bushes That May Appear In The Ground Within 1 M On Both Sides Of The Path. Attention. In The Reserve Nature Of The Monastery Forest Must Not Be Interfered With By Cutting Down And Destroying Flora And Fauna. Next, After Compacting The Native Sandy Soil, Lay A Layer Of Crushed Aggregate With A Fraction Of 0-31.5 Mm, Compacted With A Thickness Of 18 Cm And Then Wedge And Compact With Fine Aggregate Of 0-4 Mm Thickness. About 2 Cm. The Slope Is Designed To Be One-Sided Approximately 0.5-5%. B) Installation Of Small Architectural Objects - Gates. The Plan Is To Purchase And Install A Gate In Accordance With The Model Indicated In The Documentation. The Gate Has Inscriptions And Logos Specified By The Investor. The Gable Roof Is Covered With Coated Galvanized Flat Sheet Metal. All Wooden Elements Protected With Boatbuilding Varnish: Impregnation And Varnish. The Width Of The Gate Is Approximately 3 - 3.5 M, Height Crossing Lights Approximately 2.6 M. The Gate Should Be Placed On Concrete Foundations Using Galvanized Steel Anchors Type H.C) Construction Of A Footbridge. It Is Planned To Build A Footbridge With A Steel And Wooden Structure Along The Nature Trail Over The Ravine In The Place Marked On The Pzt Map. A Footbridge With A Steel Structure, Supported On Steel Columns Placed On Reinforced Concrete Foundations. The Footbridge Is Covered With Boards Of Thickness 7Cm On Steel Joists. Pla