Bids Are Invited For Acquisition Of Equipment To Improve And Expand The Fruit Growing Course At The State University Of Northern Paraná Uenp.

(L1) 6603.14658-Centrifuge, Immunohematology, Rotor And Set For 12 (Twelve) Tubes Measure 12X75 Mm; Built In Sheet Steel, With High-Resistance Epoxy Paint; Full View Of The Supernatant And The Sedimentation Button; Safety Device (Electronic Lock) That Does Not Allow Operation With The Lid Open; Audible And Visual Alarm At The End Of Centrifugation; Specific Keys For: Speed ​​Selection, Time, Pilot Lamp, Start And Stop Activation Buttons, Revolution Counter; Functions Viewed Through Front Digital Panel; Compact Size, Approximate Measurement Width/Depth/Height 32X40x24 Cm; Maximum Rotation: 4,400 Rpm/3000Rfc X G; Induction Motor (Brushless); Internal Area Completely Made Of Stainless Steel, Rounded Corners, Easy To Clean; Closing Of The Lid With Motorized Lock, Light Touch And Automatic Opening Of The Lid At The End Of Centrifugation; Optimized Air Flow To Avoid Heating Of Samples; Acceleration Time To Maximum Speed ​​Less Than 26 Seconds, With Maximum Load; Deceleration Time From Maximum Speed ​​Less Than 19 Seconds, With Maximum Load; Speed ​​Selection From 100 Rpm Up To Maximum Speed ​​In Increments Of 100 / 100 Rpm; Possibility Of Exchanging Rotors And/Or Adapters; All Rotors And/Or Adapters Autoclavable (121 ºc / 20 Minutes), Adjustable Time Controller Up To 99 Minutes Or Continuous Mode Operation; Electronic Tachometer; Silent Operation Below 57 Db; Electrical Supply: Bivolt 110V/220V, 50/60 Hz, Additional Features: With Spare Parts In Case Of Corrective Maintenance, If Necessary, At Least For 5 Years; Supply Of Electrical Plant Of The Equipment, Operation Manual In Portuguese; The Technical Opinion Will Only Be Issued After Validation Of The Equipment, Unit. Measurement: Unitary, (L1) 6603.57912-Bench Centrifuge With Display, Additional Features: Other Information According To Term Of Reference And/Or Technical Description Of The Process, (L2) 6603.36111-Refractometer, Additional Features: With At Minimum: Portable Digital, Automatic Reading On Led Display With Automatic Temperature Compensation Temperature In The Range Of 15º To 45ºc, Prisma With Output For Connection To Thermostatic Bath For Recirculation, Output Communication Rs 232, Voltage: 110V, Refractive Index: 1.3000 To 1.7000 Nd, Accuracy: 0.0002, Minimum Brix: 0 To 45%, 1%, (L2) 6603.99426-Refractometer, Type: Digital Benchtop, Use: Laboratory, Specification: Measuring Range: 0% To 100% Brix, Resolution: 0.5% Brix, Minimum Measurement Accuracy 0.01% Brix, Automatic Temperature Compensation: 5ºc To 40ºc, Minimum Sample Volume 0.3Ml, Ac Power Adapter 100V To 240V, Consumption 30Va, Frequency 50Hz To 60Hz, Reading Time 3 Seconds, With Output For Printers, (L3) 6603.56860-Bod Incubator, Capacity Minimum 250L, Externally Constructed In Carbon Steel With Anti-Corrosion Treatment And Electrostatic Powder Painting, Internally In Stainless Steel, This Construction Guarantees Durability And Easy Asepsis, Refrigeration Through An Ecological Cfc-Free System, Thermal Insulation With Low Temperature Dissipation And A Door Constructed With Magnetic Sealing With High Sealing Power, Forced Internal Circulation Of Air That Guarantees Perfect Temperature Homogeneity, Control And Temperature Reading Via Sensor Pt100 With Resolution Of 0.1°C, Comes With Calibration Certificate By Rbc (Brazilian Calibration Network), For Tempering