Tenders Are Invited For Renovation Of The Road Surface Of District Road No. 3292D, Ul. Wielisławska In Kłodzko, Km 0+176 - 0+560

1. Name Of The Task Given By The Ordering Party: Renovation Of The Road Surface Of District Road No. 3292D, Ul. Wielisławska In Kłodzko, Km 0+176 - 0+5602. The Subject Of This Public Procurement Is: Construction Works3. The Scope Of The Order Includes: • Cutting And Filling Of Roadsides With Crushed Aggregate Or Milled Gravel On Both Sides - Average Thickness Of 15 Cm, On A Width Of 50 Cm, Together With Filling, Planting And Appropriate Compaction; • Cold Milling Of Asphalt Surfaces - Roadway, Average Thickness Of 5 Cm With Removal Of Excavated Material Up To 1 Km Along With A Storage Fee Or Disposal Of Surplus Excavated Material; • Excavation And Construction Of A Main Channel. 10 Cm For The Designed Exits; • Making A Substructure Of Crushed Aggregate, Upper Layer Thick. 10 Cm On Exits;• Construction Of The Through Part Of The Culvert Under The Road From Reinforced Concrete Pipes Ø 60 Cm Along With Dismantling The Existing Culvert And Performing Earthworks;• Construction Of End Walls From Crushed Stone In Cement Mortar;• Asphalt Concrete Surface: Binding Layer - Asphalt Concrete Ac 16 W, 5 Cm Thick - Road + Exits; • Asphalt Concrete Surface: Wearing Course, Ac 11 S Asphalt Concrete, 4 Cm Thick - Roadway + Exits; • Cleaning The Ditch From Silt With A Silt Thickness Of Up To 20 Cm; • Cleaning Silt From Concrete Channels;4. A Detailed Description Of The Subject Of The Order Is Specified In: 1) Auxiliary Cost Estimate - Appendices No. 11 To Swz2) Site Plan - Appendix No. 12 To Swz5. Detailed Technical Conditions For The Execution Of Works Are Specified In: Detailed Technical Specification (Sst) - Annex No. 13 To Swz.6. Whenever References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Are Used In The Design Documentation, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If Trademarks Are Used In The Design Documentation Or Technical Specifications For The Execution And Acceptance Of Works, It Means That They Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Use Equivalent Materials Or Devices, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will In No Way Adversely Affect The Proper Functioning Of The Solutions Adopted In The Design Documentation. The Contractor Who Uses Equivalent Devices Or Materials Will Be Obliged To Demonstrate During The Execution Of The Order That The Devices And Materials Used By Him Meet The