Tenders Are Invited For Adaptation And Modernization Of The 3D Scanning And Printing Laboratory And An Electrical Workshop With Computers Assembly In The Ckz Building Ul. Dziektopowa 10 In Świdnik

4.2.1. Part 1 Of The Order - Adaptation And Modernization Of The 3D Scanning And Print Workshop In The Ckz Building (2Nd Floor) Ul. Dzień Workshopowa 10 In Świdnik, The Detailed Scope Of Works Includes: 4.2.1.1. The Scope Of Adaptation And Construction Works: 1) Security Works:-Floor Protection (200 M2) And Glass Against Dirt And Mechanical Damage (50 M2); 2) Demolition Works: Dismantling, Dismantling Of The Full Partition Wall From Brick (Gr. 1/2 Bricks) On Cement-Lime Mortar (6M2), Removal Of Rubble And Soil, Removal (7M3), 3) Placement Of Prefabricated Lintels (Lm) - Strengthening Of The Wall Parts. 4) Fitting Window Wings (0.5 - 2.5 M2): Window Adjustment And Window Glyph Processing To Ensure Proper Deposition, 5) Replacement Of Door Joinery: Forging From The Wall Of Wooden Frames With An Area Of ​​Over 2 M2, Assembly Of Steel Door Refractory With A Frame Without Changing The Dimensions Of The Hole.6) Forging Holes In Brick Walls Over 1/2 Brick (1 M3)-Removal Of Building Residues After The Old Industrial Ventilation System Without Violating The Building Structure. Ordinary Cement Plasters On Vertical Walls (50 M2), Priming The Surfaces Of Brick, Concrete And Chipboard Panels (150 M2), Two-Layer Plaster On The Walls Made Of Prefabricated Elements And Poured Concrete (150 M2), Painting Internal Surfaces With Two-Handed Surfaces Of The Wall Surfaces (150 M2) .8) Preparation Of The Floor: Disassembly, Dismantling Of The Floor From Tiles On Cement Mortar (5 M2), Preparation Of The Old Substrate With A Light Method-An Emulsion With Emulsion (5 M2), Laying Floor Tiles On Glue (5 M2) .4.2.1.2. Electrical Adaptation And Modernization Works: 1) Installation Of Installation Troughs Up To 200 Mm Wide (100 M), Preparation Of The Substrate For Installation Equipment, Fixing Of The Accessories In Brick Ground (150 Pcs), Laying Electrical Cables-Pulling The Single-Circuit Wires With A Cross-Section Of 2.5 Mm2 To Cover Pipes (100 M), Installation Of Rj45 Modules In Sockets In Sockets Network (10 Pcs), Assembly Of Installation Sockets With Protective Contact, Mounted, Bipolar Bipper, Loading 16A (12 Pcs). 2) Connecting Single Cables (Fi Up To 2.5 Mm) For Clamps Or Pins (12 Pcs). 3) Checking And Measurement Of The Electrical Circuit Of The Low Voltage Installation (1 Measurement).