Tenders Are Invited For Modernization And Construction Of Street Lighting In The Kkujecin Commune

1. Construction Of Street Lighting In The Kkujecin Commune - Ul. Drzymały In Łazy Kurzychowe, 42-288. There Is No Road Lighting On Drzymały Street. The Project Involves The Construction Of 14 Lighting Points Illuminating The Abovementioned Street. 2. For Road Lighting, Luminaires With A 32.1W Led Light Source, Ip66, Ik09, Protection From 10Kv Surge Have Been Designed. Build The Luminaires On Steel Poles With A Height Of 8.0M. Apply Luminaires With A Color Temperature In The 4000K Range. Round, Steel Poles-Galvanized, 3Mm Wall Thickness Built On Prefabricated F-120/43 Foundations In Accordance With The E-2 Area Development Project. Use The Izk Connectors In The Poles. Drink A 3X2.5Mm2 Cable Inside The Pole. The Scope Of Work Includes: 1. Street Lighting Cable Line - Yakxs Cable 4X35mm2 2. Installation Of Street Lighting Columns - 8M 3. Suspending Led Fittings - 32.1W4. Anti -Tire Installation. 4. The Designed Lighting In Accordance With The Obtained Connection Conditions Will Be Powered From A Separate Lighting Line Powered From The Transf Station. Sn/Nn Czz30615 Kurzychowe, And The Place Of Demarcation Of Ownership And The Limit Of Operation Will Be The Current Clamps On The Street Lighting Cable On The Pole No. 12 (Czz144119) Towards The Designed Installation. To Do This, Build The Rsa Disconnector On The Above -Mentioned Pole And Then Build A Section Of The Cable Line Supplying The Designed Lighting. The Designed Lighting Poles Will Be Powered By A Yakxs 4X35mm2 Cable Line, And Cables Should Be Laid In Accordance With N Sep -E-004 Electricity And Signaling Cable Lines. Designing And Construction Under The Road With A Trenchless Method At A Depth Of 1.0-1.4M, And To The Remaining Extent At A Depth 0.1 M. Under The Sidewalks, Lay The Cable In The Ø110mm Pipe. Cover The Laid Cable With Sand, A Layer Of Soil 0.15 M Thick And Blue Foil. At The Intersections With Roads, Exits And Existing Utilities Of The Area, Lead A Cable In A Thick -Walled Protective Pipe. Arrange The Cables In The Trench With A Corrugated Line. At The Lanterns, Leave Cable Supplies With Lengths In Accordance With The Standard. Supply The Cables With Distributed Markers, Every 10 M, And With All Introductions To Pipes And Culverts And At The Intersection With Existing Weapons Made Of Material Difficult To Degradation, On Which To Put Permanent Inscriptions Containing:- Symbol And Cable Record Number- Type And Cross-Section Of The Cable- The Construction Of The Construction- Ranked Voltage- Cable Sign. Before Starting Earthworks, At The Intersection Of Cables With Other Underground Devices And In Places With High Utilities, On The Route Of Designed Cables, Checks Should Be Carried Out To Determine The Actual Course Of These Devices. When Performing Earthworks Near The Water Supply, Electrical, Telephone Or Gas Installations, The Technical Supervision Of Users Of These Installations Should Be Provided. Particular Attention Should Be Kept When Conducting Earthworks Near Trees. Earthw