Bids Are Invited For Future And Eventual Acquisition Of Manual, Electric And Pneumatic Machines And Tools, In Compliance With The Secretariats Of The Municipality Of Sapezal-Mt.

Pressure Pliers Measuring 10¨ In Chromo-Vanadium Steel., Rivet Pliers Measuring Standard Size, With Plastic Isolated Cable, Painted In Epoxy, For 4 Rivet Measurements, For Pop Rivets, Measuring 12¨ Torques, With Isolated Cable In Pvc, Chrome. Large Size Aluminum Silicone., 02/10/2025, 12 ”Sierce Arc, Closed Cable, Accompanying Mountain Range. Mm, Having 90 Cm Long. Varnished Wood With Plastic Curing Bushing., Accordion -Type Toolbox, In Blue Electrostatic Steel Containing 05 Compartments. Measuring Approximately 50 Cm X 20 Cm X 20 Cm., Complete Hand Cart, Reinforced, 45 To 50 Liters Load, With Tire And Camera., Manual Horse, With 2 Blades, With Wooden Cable, Used To Open Hole,, Pneumatic Impact Key, 1/2 Fit, For Screw Up To 5/8. Rotation Of 7,000/Min, Working Pressure Of 90 Lbf/In², Maximum Torque Of 339 N.M, 1/4 Npt Female Air Inlet Thread. It Should Be Supplied With Plastic Briefcase And Accessories., 1 ”Fit, For Screw Up To 2”. Rotation Of 3,600/Min, Maximum Torque Of 316 Kgf.M, 1/2 Npt Female Air Inlet Thread. With 03 Reversal Positions And 03 Tightening Positions. Trigger Trigger, Containing Auxiliary Wrist. It Should Be Supplied With Plastic Briefcase And Accessories., 8 In 1 Multifunctional Hydraulic Switch, Repair For Sinks, Taps And Valves. Adapter For 40 Mm, 34 Mm, 28 Mm, 23, 5 Mm And 21 Mm. Level System, Broken Breadcrow Extractor., Rectum Corner Spoon, 9 Or 10, For Use Under Construction., 01 Stage Compressor, Maximum Pressure Of 2, 8Bar - 40Lbf/In2, With Flow Of 2, 3Pcm - 65L/Min, With Electric Drive, With Power 1/2 Hp - 250W, In The Voltage Of 110/220V, With 01 Painting And Painting, 02 Connections, 01 Short Cleaning Nozzle, With 01 Hose., Industrial Air Compressor, 10 Pcm, 140 Lbf/In², 9, 7 Bar Pressure, 175 Liter Reservoir Capacity, 2 Hp Engine Power, Single Phase 220V. Plastic, Black. For Plaster Finish., Smooth -Type Pitch, Wooden Handle Blade. Measuring Approximately 12 Cm X 25 Cm., Cutting Disc For Ferrous Metals With Angular Grinder, Reinforced Structure For Industrial Use In Continuous Work, In The 4.1/2 ”Gauge., South Type Hoe, 1 Pounds, Oval Eye, With 130 Cm Cable And Plastic Bushs Scope. - 115 Mm, Minimum Power Of 800 W, Minimum Rpm Of 12,000/Min, Accompanied By Auxiliary Fist With Two Fixing Positions. Accompanies Tight Key. In Voltage 127V/220V., Steel Spatula For Painting, In Size 10 Cm., Square For The Use Of A Mason, In Aluminum, With Aluminum Cable, 30 Cm Scale. 12V/8, 3A, Air -Cooled Engine, Mono