Catheter For The Uterine Arteries. Radiological Catheter For Uterine Arteries. The Length Of The Catheter Is 90Cm, A Different Degree Of Stiffness. The Size Of The Catheter Is 5F. Recommended Conductor 0.038. The Tapering Tip Of The Catheter To Facilitate Positioning In The Vessel. The End Of The Tip Is Tungsten Alloy For Excellent Visualization. Material Of The Sleeve Of The Catheter Polyuretan. Wings. Design Of The Busbar Accordion With Compensation Of The Tension. Twisting 1: 1. Maximum Pressure 1200Psi (81, 6, 6, 6 Bar)., Analog Analog Interflator, Tork With A Device And A Hemostatic Valve (Type Click). Complete Technical Specification In Appendix 2, The Transradial Introduct Is Complete With A Needle, Dilator And Conductor. Interavuser With A Length Of At Least 7, 11 Cm, With A Lateral Polyurethane Port For Washing, A Hemostatic Valve, A 3-Running Crane And A Needle. The Core Of The Introduer And The Dilator X -Ray, The Material Is Polyethylene Or Polypropylene, Is Equipped With A Rotating Ring For Fastening Using Threads. All Parts Are Packed In A Plastic Ring, Which Allows The Components To Rinse And Ensures The Safety Of Parts. The Dilator Is Equipped With A Mechanism Of Latching To Minimize Blood Flow And Slide The Dilator. Line For Washing A Large Lumen. The Presence Of Color Encoding Of A Tanker, Dilator And A Tap According To The Inner Diameter 4 (Red), 5 (Gray), 6 (Green), 7 (Orange). The Presence Of A Dilator, Obturator And Conductor 0.018 (0.46Mm), 0.025 (0.64Mm), 40, 50Cm Length (For Interodesers 7 And 11Cm) And 80Cm (For 23Cm Intrastrodists). The Material Of The Conductor Stainless Steel With A Platinum Tip, The Conductor Has Two Working Ends: A Flexible J -Conch 3Mm And A Straight Flexible Tip, 0.018 Steel - One -Sided With A Twisted Tip. Metallic Needle Advanced With A Short Bevel, With A Coating Reducing The Risk Of Spasm 4.0 Or 7.0Cm Long, The Presence Of A Diameter Of 20 And 21G. The Presence Of Color Encoding For Different Sizes Yellow (20G), Green (21G). The Unique Angle Of The Needle Cut. The Number Of Parts 1. The Material Of The Cannulas Is Stainless Steel. The Presence Of A Silicone Coating Of The Entire Needle Surface To Facilitate The Fabric. The Possibility Of Various Configuration Of Sets At The Request Of The Customer., Microspheres For Embolization. Microspheres Are Biomedic, Hydrophilic, Not Absorbing, Like Calibrated Microspheres From Acrylic Polymer, Saturated With Gelatin. Release Form: A Pre -Filled Syringe With A Capacity Of 20 Ml With A Standard Luera Tip, Individually Packed On A Blister Tray, Hermetically Closed With A Torn Lid. Plastic Screwing Cap And Piston. Piston Seal With Three Elastomer Rings. Microspheres In The Composition Of Gold Particles Are Painted In Red To Facilitate Visualization When The X -Ray Contract Is Addressed And Visible. Content: 2 Ml Of Microsphere In A Sterile Aphyrogenic Physiological Solution With A 0.9% Nacl. The Diameter Of The Particles Is 40-120, 100-300, 300-500, 500-700, 700-900, 900-1200 Μm. Microspheres Are Flexible Particles That Can Be Temporarily Compressed By No More Than 20 - 30%, Which Facilitates Their Passage Through Microcateters, And Excludes Non -Purpose Embolization. Microspheres Do Not Form Units. Compatible With A Microcatometer With I.D. 0.008 ”Until 0.038”. The Microspheres Are Designed To Occlusion Of Blood Vessels For Therapeutic Or Preoperative Purposes For The Following Procedures: - Embolization Of Hypervascular Tumors And Processes, Including Uterine Fibroids, Embolization Of The Prostate Gland, Embolization Of Arteriovenous Anomalios, Maleformations, Hemostatic Embolization, Decartherization Embolization Of The Pelvic Organs, Meningiomas, Etc. Sizes According To The Application Of The Customer.
