(L1) 4201.105296-Kit, Type: Fire Simulator, Composition: 1 Burner, 1 Command Table, 1 Cable And Hose System, 1 Class A Fire Simulator (Dump), 1 Class B Fire Simulator (Frying Pan), 1 Class C Simulator (Electric Panel) And 1 Portable Power Plant, Specification: Projected In Stainless Steel 304, Corted In Laser Process And Folded In Cnc Process, With A Minimum Sheet Of 1, 2Mm Thick, Have A Propagation Basin Approximately 608Mm Wide, 740Mm Long And 272Mm Deep, Weighing Approximately 13Kg, Basin To Store At Least 20 Liters Of Water For Flame Safety Of Up To 1, 5M High, With Exclusive Drain For Runoff For Drain Water, 44Cm -Long, And 19, 3Cm Wide -Type H Burner, For Transport By A Single Person, Has About 100 Holes At Least 2Mm In Diameter, Made Of Corrosion Resistant Materials Such As Stainless Or Aluminum, Brass Connections Or Equivalent Material To Prevent Oxidation, Containing Two Connections: One For Quick Glp Gas And Another For The Power Power Cord, Both With Appropriate Sealing, Fully Armored Sparking Center, With 8, 5Cm Candles For The Production Of Volt Arc, The Entire Set With High Temperature Silicone Sealing, 1/2M³ For 1 Hour Of Use, With Adaptation To Attach The Fire Simulation Accessories: The Trash, The Frying Pan, And The Electric Panel: Portable Table, Projected In Stainless Steel, Stainless Steel Table Carbon Or Other Material With Equivalent Mechanical Resistance, When Carbon Steel Should Have Surface Treatment In Electrostatic Painting, Endowed With Electrical Circuits And Special Gas Connection Network, Gauge Pressure Gauge, Command Of The Entire Device In Two Ways: Via Cable Control With At Least 10 Meters In The Burners And Archery Burn And Archery For Burnt Ignition
