Request For Quotation Goods For Household Needs

Cable Channel For Wire, Emalus Is Brown (Glossy). Technical Characteristics: Brown Enamel Pf-115. (Glossy) Description Is A Suspension Of Routing Dioxide And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of Sequcasa, Solvents And Targeted Additives. The Purpose Is Intended For The Painting Of Metal, Wooden And Other Surfaces That Are Exposed To Atmospheric Influences And For Painting Indoors. Emalya Coatings Have High Protective-Decorative Properties. The Film Combines Sufficient Hardness With High Elasticity And Durability. The Enamel Film Is Resistant To Temperature Change From Minus 50 To Plus 60 ºс. The Coating Consisting Of Two Layers Of The Pf-115 Enamel, Applied To A Prepared Primed Surface, Retains Protective Properties In Moderate And Cold Climate For Four Years To A Point No More Than Az1 And Decorative Properties For One Year Before A Point Not More Than Ad2. Technical Characteristics 1. The Enamel Coating Color Should Be Within The Permissible Deviations Established By Samples Of The “File Cabinet” Or Control Samples Of Color, Approved In The Prescribed Manner. 2. The Appearance Of The Coating After Drying The Enamel Should Form Smooth, Homogeneous Without Relaxation, Ospin, Pomp, Wrinkles And Extraneous Inclusions The Surface. A Small Shag Is Allowed. 3. The Gloss Of The Coating According To The Photoelectric Glimmer, %, At Least 50 5. The Mass Fraction Of Non-Ruling Substances, %, Depending On The Color 49-70, Brown Color 6. The Degree Of Dilution To Viscosity Is 28-30 S In The Viscimeter Of The Type Of The Bi-246 With A Nozzle Diameter Of 4 Mm At A Temperature (20.0 ± 0.5) ºс, %, No More Mkm, No More Than 25 8. The Cover Of The Dried Film, G/M2, No More, Depending On The Color Of 30-120 9. The Drying Time To The Degree Of 3 At A Temperature Of (20 ± 2) ºс, H, No More For Enamels: 24 10. Packing Is Metallic And Plastic Containers In Containers Of 10 Liters Each. Gost 6465-76 Without Smell, Double Insulation Wire No. 4, Emalus Is White Pf-115. (Glossy) Description Is A Suspension Of Routing Titanium-Shaped Dioxide And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of A Sequcue, Solvents And Targeted Additives. The Purpose Is Intended For The Color Of Metal, Wooden And Other Surfaces That Are Exposed To Atmospheric Influences And For Painting Indoors. The Enamel Is Resistant To A Change In Temperature From Minus 50 To Plus 60 ºс. Technical Characteristics 1. The Color Of The Enamel Coating. The Shine Of The Coating According To The Photoelectric Glimmer, %, At Least 50 5. The Mass Fraction Of Non-Ruling Substances, %, Depending On The Color 49-70, White Color Is 6. The Degree Of Dilution To Viscosity 28-30 S According To The Viscimeter Of The Type 4 Mm Type With A Temperature (20.0 ± 0.5) ºс, No More 25 8. The Cover Of The Dried Film, G/M2, No More, Depending On The Color Of 30-120 9. The Drying Time To The Degree Of 3 At A Temperature Of (20 ± 2) ºс, H, No More For Enamels: 24 10. The Elasticity Of The Film During Bending, Mm, Not More Than 1,11. The Capacity Of The Film Is At Least 4 12. The Hardness Of The Coating According To The Coating According To The Coating The Pendulum Device Of The Tml Type (Pendulum A), Relative Units, At Least 0.10 13. Adhesion Of The Film, Points, No More Than 1 14. The Resistance Of The Coating At A Temperature Of (20 ± 2) ºс To Static Exposure To Water, H, The Resistance Of The Coating To Static Exposure To 0.5%Detergent Solution, At Least 15 16. The Resistance Of The Coating At Temperatures At Temperatures At The Temperature (20 ± 2) ºс To The Statistical Effects Of Transformer Oil, H, At Least 24 17. Gost Notes: When Using Enamels, Hot Drying Of The Coating Is Allowed At Temperatures (105-110) ° C For 1 Hour. The Use Of The Dried Coating Is Safe For Humans. Packing Metal And Plastic Containers In Containers Of 20 Liters Each. Gost 6465-76 Without Smell, Antifreeze, Density At 20 ° C, G/Cubic Meter, In The Range Of 1.065-1.085, Temperature, O: Crystallization, No More Than 44, Starts Boiling, Not 100, Alkaline, Cubic Meter. At Least 30. Green G12, Canister 10 Liters, The Enamel Is Blue (Glossy). Technical Characteristics: Emal Blue Pf-115. (Glossy) Description Is A Suspension Of Routing Titanium And Other Pigments And Fillers In Pentafal Varnish With The Addition Of Sequcasa, Solvents And Targeted Additives. The Purpose Is Intended For The Painting Of Metal, Wooden And Other Surfaces That Are Exposed To Atmospheric Influences And For Painting Indoors. Emalya Coatings Have High Protective-Decorative Properties. The Film Combines Sufficient Hardness With High Elasticity And Durability. The Enamel Film Is Resistant To Temperature Change From Minus 50 To Plus 60 ºс. The Coating Consisting Of Two Layers Of The Pf-115 Enamel, Applied To A Prepared Primed Surface, Retains Protective Properties In Moderate And Cold Climate For Four Years To A Point No More Than Az1 And Decorative Properties For One Year Before A Point Not More Than Ad2. Technical Characteristics 1. The Enamel Coating Color Should Be Within The Permissible Deviations Established By Samples Of The “File Cabinet” Or Control Samples Of Color, Approved In The Prescribed Manner. 2. The Appearance Of The Coating After Drying The Enamel Should Form Smooth, Homogeneous Without Relaxation, Ospin, Pomp, Wrinkles And Extraneous Inclusions The Surface. A Small Shag Is Allowed. 3. The Gloss Of The Coating According To The Photoelectric Glimmer, %, At Least 50 5. The Mass Fraction Of Non-Ruling Substances, %, Depending On The Color 49-70, The Color Of The Blue Color 6. The Degree Of Dilution To The Viscosity Of 28-30 C According To The Viscosimeter Of The Type Of Nozzle 4 Mm At A Temperature (20.0 ± 0.5) ºс, %, No More No More Than 25 8. The Cover Of The Dried Film, G/M2, No More, Depending On The Color Of 30-120 9. The Drying Time To The Degree Of 3 At A Temperature Of (20 ± 2) ºс, H, No More For Enamels: 24 10. Metal And Plastic Packaging In Containers Of 10 Liters Are Local. Gost 6465-76 Without Smell