Tenders Are Invited For Construction Of Agricultural Equipment Car Wash For Works For The Care Of Forest Crops

The Subject Of The Order Is The Construction Of The Equipment Of The Equipment Car Wash Used For The Needs Of The Forest Management, Object: Category Viii. Designed Manual Car Wash Consists Of A Reinforced Concrete Ribbet Plate With A Coat Covered With A Grille. In Order To Retain The Suspension From Rainwater Or Technological Sewage Flowing Gravitational, A Separator Is Designed In Which A Built -In Settler Is Built. The Built -In Settler Reduces The Suspension Content In Cleaned Up, Protects The Separator From Quick Silting And Improves The Conditions Of His Work. Waters Flowing From The Plate To The Drainage Pit Will Flow Through The Ø 110 Sewer Pipe With Pvc To A 2.0M³ Sand Sedrint Built In The Separator, Through A Previously Built -In Typical Dn 315Mm Well With Pvc. Then, The Sewage Cleaned Of Sand Will Be Transmitted To The Chamber In The Separator, In Which The Coolescent Insert Is Built In Order To Separate Petroleum Contaminants. After Separating These Substances, The Cleaned Sewage Will Be Discharged To The Drainage Concrete Tank With A Capacity Of 10 M3. Oil -Based Substances And Sand From The Settler Will Be Exported For Utilization By A Specialist Company That Has Applicable Permits To Utilize Oil Substances. A Washer With A Pressure Guide For Washing Machines Will Be Portable. Water To The Washer Will Be Connected By A Pressure Hose From The Rearraly Valve, Which Is Located On The Wall Of The Boiler Room Building Distant From The Designed Car Wash 15 M. After Washing The Equipment, The Hose Will Be Rolled Up And Stored In The Utility Room Together With A Pressure Washer. Powering The Washer With Electricity From The Socket Located On The Outbuilding At The Designed Car Wash. The Area Around The Plate Will Be Hardened With A Concrete Cube.