Bids Are Invited For Acquisition Of Medical Equipment For The Carambeí Municipal Health Center

Neonatal Transport Incubator Description: Neonatal Transport Incubator For Heating And Maintenance Of Newborn Temperature. Technical Specifications: Incubator Summit: In Transparent Acrylic With Rebound Front, Trapezoidal Format For Better Temperature Homogeneity. Containing At Least: 4 Oval Hatch With Trincos And Atochob And Self -Circlavable Silicone Seals; 1 Iris Type Plot On The Head In Autoclavable Material; 1 Rectangular Hatch On The Side Of The Dome And At Least 4 Atochog And Autoclavable Material Garnishes For Pipe Input. It Must Also Enable The Total Survey Of The Summit. In Addition To Having An Exclusive Damp Damping System For Soft Closure And Safe Opening, Which Avoids Possible Accidents By Sudden Falls And Garnish To Cushion Close To The Base. Patients Guide: It Should Be Made Of Plastic Material, Transparent Radio That Allows The Simple And Rapid Output Of X -Ray Without The Need To Move The Patient From The Thermal Comfort That Provides Smooth Bed Displacement Out Of The Bed Limiting Security Lock Dome, Facilitating Urgent Care. It Should Also Have A Simple And Safe Adjustment System For Four Bed Positions Without The Need To Open The Dome: Trendelenburg Position, High Horizontal Position, Low Horizontal Position And Proclive. Density Foam Mattress Appropriate To The Patients Comfort In Non -Toxic And Biocompatible Material, With Removable And Antiallergic Coating In Bed Dimensions. Body - Chassis: Have Anti -Rust Treatment And Paint With High Strength (Electrostatic Powder) That Resists Cleaning And Disinfections, Looming Loops And Support For At Least One Hook Made In Stainless Steel And Food: Have A Rechargeable Internal Battery With Autonomy Of Up To 4 Hours, Graphic Battery Charge Indication And Automatic Bivolt Feed (127/220V) Or ..., Gasometrics, Venous And Arterial Deeds: Portable Device For Gaseous Analysis And Blood And Venous Blood Electrolytes Through Test Cards, Thus Excluding The Need For Maintenance And Calibration Of The Calibration. Device. Technical Specificationscorp: It Should Be Made Of High Quality Plastic Material, Durability And Resistance. Being Portable And Having As Maximum Dimensions The Following: 24 Cm X 10 Cm X 8 Cm. Control Panel: Touch Screen Of At Least 3, 5 Inch Battery: It Should Be Rechargeable And Lasting For At Least 3 Hours With The Possibility Of Using Automatic Bivolt (127/220V) Or 12Vcc. Should Come Embedded Or Attached To The Product As An Accessory. Hardware: It Should Contain At Least 1 Gb Ram And At Least 8 Gb Rom.Other: It Should Contain Compatibility With Wi-Fi And Bluetoothacessories Included: It Should Be Accompanied By The Following Accessories: Manual Thermal Printer Charger Usage In Too Portuguese Component For The Proper Functioning Of The Device Analyzed: Ph, Pco2, Po2, Na+, K ++, Cl-, Cl-, Cl-, Cl-, Cl- Glu, Lac, Crea, Hct. Other Analysis Parameters May Be Added, Provided That The Minimum Requirements Have Been Filled. Environmental Conditions: Operating Temperature: 20 ° C - 38 ° C. Thermal Amplitudes Can Be Higher,