Bids Are Invited For Price Registration For Supply With Installation Of Solid Waste Compaction Equipment, With A Capacity Of 15M³, Intended For The Replacement Of Equipment Currently Installed In The Collecting Trucks Of The Secretariat, Taking Advantage Of Existing Vehicles.

Urban Solid Waste Compactor Collector. Specification: Urban Solid Waste Compactor Collector Rear, New, National Manufacturing Compactor, Intended For The Collection And Transportation Of Urban Solid Waste With Complete Installation Of The Equipment In The Chassis Provided By The Public Administration. The Equipment Must Have A Minimum Volumetric Cargo Box Of 15 M For Compacted Waste, Built With Smooth Sides; The Rear Loading Square Should Have A Minimum Capacity Of 2, 0 M For Loose Waste, Being Made Of High Mechanical Resistance And Abrasion Structural Steel, With Thickness Compatible With The Proposed Use. The Following Minimum Thicknesses Are Recommended: Sides And Ceiling With 4, 75 Mm; 6, 35 Mm -Rear Skirt And Rear Skirt; Ejector Shield With 4, 75 Mm; Chassis Of The Box In Profile U With A Minimum Thickness Of 6, 35 Mm. The Painting Should Include Anti -Corrosive Background Application (Primer Pu Or Equivalent), With Final Finish In The Color To Be Defined By The Contracting Party. The Compaction System Should Be Composed Of Plates (Compression And Carrier) Or Equivalent Technical Solution, Operated By Double -Acting Hydraulic Cylinders, Sufficient To Ensure Effective Operation. The Ejector Panel Should Be Triggered By Double -Acting Or Equivalent Telescopic Hydraulic Cylinder, Allowing The Rear Of The Residue To Discharge. The Compaction Cycle Should Be Semiautomatic Type, With Command Located At The Rear Of The Equipment, And Must Have A Safety System That Allows The Interruption Or Reversal Of The Cycle At Any Stage. The Plates And The Ejector Panel Should Be Mounted On Guides Or Tracks With High Strength And Low Friction Coating, Such As Self -Lubricating Or Technically Equivalent Polymer. The Equipment Must Have A Minimum Compaction Index Of 4: 1. The Rear Lid Should Have Opening And Closing System By Means Of External Hydraulic Cylinders Of Simple Action, With S Lock, Vehicle Transport On Board. Specification: Transportation Of Vehicles On Transportation Will Comprise The Displacement Of Volkswagen Trucks Model 17.190, 4X2, Toco Type, Between The Contracting Party Garage And The Contractor Dependences, In Both Directions (Round Trip), Using Properly Licensed Vehicle (Board) And In Accordance With Current Traffic And Safety Rules. Board; Proper Fixation To Avoid Movement Or Damage During The Route;? Fuel Costs, Tolls, Fees And Other Displacement Expenses;? Integral Responsibility Of The Contractor Regarding Insurance, Risks And Eventual Damage During Transport.