Bids Are Invited For Hiring A Company For The Supply Of Hospital Equipment, Chairs, And Electroelectronics Intended For Municipal Health (State Resource)

Pulmonary Fan (Adult, Pediatric And Neonatal) 1. Equipment Purpose: The Pulmonary Fan Is Intended For Ventilatory Support Of Adult, Pediatric And Neonatal Patients (Including Premature Newborns), In Intensive Care Environments, And Should Operate In Invasive, Noninvasive And High Flow Vain Modes, As Clinical Need.2. General Technical Requirements: The Equipment Must Meet The Following Minimum Requirements: Suitable For Use In Neonatal, Pediatric And Adult Patients (Including Morbid Obesity), With Adjustable Parameters According To The Age Group; It Should Operate With Pneumatic Feed By O₂ And Medicinal Compressed Air, With Input Pressure From 280 To 650 Kpa; Must Be Microprocessed, With Pressure, Volume, Flow And Time Control; It Should Contain Touch Screen With Intuitive Graphics Interface And Easy To See (With At Least 12 Inches); It Must Have Invasive And Noninvasive Modes Of Ventilation, Allowing Controlled, Assisted And Spontaneous Ventilation; It Should Have A High Nasal (Hfnc) Modality For Noninvasive Support, Including Neonatal Patients, Should Have A Self -This, Valve, Alarm And Integrity Of The System Before Use, Should Have An Internal Battery With A Minimum Autonomy Of 90 Minutes In Continuous Operation With Automatic Recharge. 3. Ventilation Modes (Required Minimums): Invasive Modes (Minimum): Controlled Volume; Controlled Pressure; Assisted/Controlled Volume; Assisted/Controlled Pressure; Pressure Support; Simv With Controlled Volume; Simv With Controlled Pressure; Invasive Cpap; Modality With Double Control (Eg Pressure With Guaranteed Volume). Non -Invasive Modes (Minimum): Noninvasive Cpap; Non -Invasive Support Pressure; High Flow Modality (Hfnc) With Gases Mixture; Simv Not Invasive. All Modes Should Have Automatic Backup Ventilation In Case Of Apnea.4. Resources And Minimum Functions: Graphical Interface With Simultaneous Md View, Modular Multiparametric Monitor With Touch1 Screen. Purpose Equipment Intended For Continuous Multiparammetric Monitoring Of Vital Signs In Adult, Pediatric And Neonatal Patients, In A Hospital Environment, With Friendly Interface And Modular Expansion Resources.2. General Characteristics Modular Equipment, Compatible With Basic And Advanced Monitoring, Color Sensitive, 10, 4 Inch, Allowing Simultaneous Views Of Multiple Parameters And Curves; Resolution Compatible With Clear Presentation Of Curves, Parameters And Trends; At Least The Following Integrated Basic Parameters: Ecg (3, 5 And 12 Derivations); (Bioimpedance); Spo₂ (With Signing Curve And Perfusion Index); Temperature (2 Channels); Noninvasive Blood Pressure (Pni) .3. Modularity And Expansibility For A Minimum Of 2 Free Slots For Insertion Of Additional Modules (Such As Pi, Etco₂, Cardiac Output, Anesthetic Agents), With Fast-Fitting Technology (Hot-Swap); Equipment Must Accept The Installation Of Expansion Modules By Dedicated Port Or Compatible Interface.4. Interface And Visualization Of The Display Up To 12 Simultaneous, Customizable Curves; Configurable Screen Layouts (Eg Large Numbers, Oximetry Curve, Trends, Transport Mode, Another Bed); Touchscreen Screen Navigation And Physical Shortcut Buttons;