Tenders Are Invited For Performing The Insulation Of Underground Walls As Part Of The Task Adjusting Water Relations From Augustyńskiego 1 To The Bastion Of St. Gertruda In Gdańsk

3 2. Execution Of Insulation Of Underground Walls In The Western Part Of The Building: Vertical Insulation From The Foundation Level To A Height Of 30 Cm Above The Surface Of The Concrete Cube Band After Prior Removal Of Damaged Layers Of Plaster And Insulation, And Cut Out The Existing Insulation Of The Above -Ground Wall To The Indicated Height. The Coating Method Should Be Used To Apply Bituminous, Polymer Or Other Moisture Preparations To The Wall To Effectively Prevent The Moisture And Damage To The Building Structure, As Well As To Avoid Problems With Fungal And Mold In Underground Rooms. Foundation Walls Should Be Insulated With Styrodur. 3. Scope Of Works:  Performing Earthworks (Excavations) To Perform Vertical Insulation Of The 2Mx3m Building. Cleaning The Surface Of The Basement Walls And Foundations. Equalization Of The Surface Of The Basement Walls And Foundations With Plastering Mortar. Equalizing The Reinforced Mesh. Sealing  Insulation Of Basement Walls And Foundations  Making The Insulation Of Basement Walls And Foundations  Making The Backs Of Excavations Along With The Removal Of Excess Soil. Making The Cubes From The Ankle At The Building. Materials Used For Insulation: Bituminous Masses (Kmb): Flexible, Waterproof, Used For Insulation Of New And Old Buildings. Thermo -Segable Felt: Made Of Modified Asphalt, Durable And Resistant To Mechanical Damage. Waterproofing Mortars: Mineral, Rigid, Effective In The Fight Against Moisture And Salinity. Injection Resins: Injected Under Pressure To Fill The Cracks And Protect The Wall Against Moisture. Bentonite Mat: Made Of Bentonite And Geotextile, Provides High Protection Against Moisture. 4. Draining Of The Internal Walls Of The Indicated Places Consists In:  Preparatory Works - Forging Plasters, Replacement Of Pedestals, Removal Of Rotting Welds  Making Insulation Consisting Of Frying The Surface Of The Walls, Frying The Brush Of Walls, Pressure Injection, Repair Of Welds, Sealing The Wall, Priming, Biocidal Impregnation, Plastering, Plastering, Plastering, Plastering, Plastering. Renovative Disposable Information: It Is Important That The Walls Are Dry And Clean Before Insulation. It May Be Necessary To Remove Old Insulation And Plasters. When Performing Insulation, Pay Attention To Connecting With Other Elements Of The Building To Avoid The Formation Of Thermal Bridges. Vertical Insulation May Require A Horizontal Diaphragm. 5. The Scope Of Works Includes:  Preparatory Work,  External Insulation,  Execution Insulation,  Filting Excavations,  Ordering The Area,  Making A Set Of As -Built Documentation. 6. The Order Should Be Processed In Accordance With The Requirements Contained In: Technical Documentation, Including The Technical Project Constituting Annex 1.1 To Swz And In The Draft Contract Constituting Annex 2 To Swz. 7. The Bill Of Quantities Should Be Treated As An Auxiliary Document, Which Cannot Constitute The Only Basis For Calculating The Remuneration For The