Bids Are Invited For Price Registration For The Acquisition Of Furniture, Electronics And Appliances To Meet The Demands Of Dr. Miguel Arraes De Alencar Hospital In The Municipality Of Bom Jardim-Pe.

Cabinet Made Of Sae-1008 Steel Plate At Sae-1012 (#22) With Dimensions Of 1980X900x450mm, Crystal Gray Color And Textured Finish, Consisting Of 02 Doors With Side Pivoting. The Right Door Has 5 Folds On The Left Side, Forming The Built -In Handle On The Door, The First With 8Mm Towards The Door In 180º, The Second 14, 5Mm Towards The Door At 90º, The Third With 51, 5Mm Towards The Door At 90 ° And The Fifth With 17, 5M With Direction Into The Door At 90 °. In The Right Side Part Should Have 2 Folds, Upper And Bottom Of The Door, The First With 13Mm And The Second With 18Mm, Both Towards The Door At 90º. The Left Door Has 3 Folds On The Right Side, Forming The Right Door Stop, The First With 8Mm Towards The Door In 180º, The Second With 13, 5Mm Towards The Door At 90º And The Third With 18, 5Mm Towards The Door At 90º, In The Left Side Has 2 Folds, Both Towards The Door In 90º. Each Door Should Contain 2 Horizontal Omega Reinforcements In “C” By Means Of Point And Bottom Weld By The Top Of The Doors, And A Vertical Omega Reinforcement On Each Door In The Central Part Throughout Its Length, As Well As 3 Hinges In Appropriate Places, And Each One Receives 3 Point Welding Points, Is Also Soldered In The Lock Area To Assist In The Locking System. For Greater Safety The Cabinet Is Equipped With Locking System Through A Doorknob And Cremoner System That Locks The Door In The Central, Upper And Lower Region, Accompanies Two Keys. It Has 04 3-Fold Reinforced Shelves On The Front And Rear And Two Folds On The Sides, Are Adjustable Through Racks Attached To The Sides Of The Cabinet, The Cremior, Wardrobe With 12 Doors, Divided Into 3 Bodies With 4 Doors Each, Made Predominantly On Sae-1008 To 1012 With 0, 75Mm (#22). Approximate Dimensions: 925 (L) X420 (P X1900 (H) Mm. Doors Locking System Is Individualized By Two -Keys Cylindrical Lock Port Aiming For Greater Safety To Users And Better Resistance To Doors Should Be Embedded, Minimizing Cutting Offspring, And Have Internal “Omega” Internal Reinforcement In The Central Part. Pivoting, Right Side, With Two Internal Hinges On Each Door. The Hinges Are Formed By Two Bodies With Two And Three Sheaths, Respectively. Each Door Contains Two Sets That Facilitate Air Circulation, One At The Top And One At The Bottom. Individualized Identification System, Each Door Has A Laddown Lattice, In The Body Itself, Which Allows For Greater Security Against Malfunction And Accidents. Injected, Which Gives Greater Resistance And Durability Even In Humid, Circular Cross -Section